How about Jacksonville peeps?
- Thread starter mhopemk3
- Start date
i dont think I can do anything tonight. Im packing up and getting ready to leave for tampa tomorrow morning. Def. would be up for meeting up once I get back Tuesday night.
Plus my car is apart for installing a couple of new toys in the glove box. hehe
Plus my car is apart for installing a couple of new toys in the glove box. hehe
Well, if we meet on Weds, or Thurs...Val wont be home. If we meet on Friday Josh will be back in tallahassee...if i remember correctly he leaves to go back on the 3rd? i think. Either way somebody ain't showing up.
jpeek29208 said:
You don't need to weld a bung for that. Cut the proper size hole in your intake pipe and thread it in. I have a bit and tap for it.
Matt, it pulls better but it still has the whole dead feel from 2k-3500 rpm's...not like it was before but it's still there. Any other idea's on what to look at ?
jpeek29208 said:
I put mine in the backside of the 3000 pipe, lined with the center of the head.
Youre right there isn't much material there to tap but the IAT will thread in there.
It reads a little hotter but you have a better reading of what the temps are closer to the throttle body.jpeek29208 said:
alright i only have two choices anyway: 3000 pipe or pipe were my bov is mounted which is were the stock plastic ic pipe was
should be able to just depends on when you all meet up next. I'm gonna finish my maft pro install today. All I have left is the IAT sensor.
Hello from Michigan! damn it is cold here....I was driving in Ann Arbor during a blizzard and what do i see? A red pre 89 supra covered in snow :cry: I would fight someone before I took mine out in the snow....Anywho hope everyone had a good New Years.....Mine went pretty well...here is an insight: :drink1: followed by :barf:
My new wheels : http://i129.photobucket.com/albums/p227/tissimo91t/Misc/FH000014.jpg 18 by 8.5 in the front w/38mm offset and 18 by 10 in the rear w/35mm offset
very nice looking rims their
on a side note: just got back from my test ride with the maft pro, feels a ton better than stock, cant wait to start really tuning it
on a side note: just got back from my test ride with the maft pro, feels a ton better than stock, cant wait to start really tuning it
Those wheels are nice Val.. you may need my bomex rear skirts to cover that 18X10. :icon_bigg
Jpeek- Nice work on the Mafft Pro glad you got it running in such a short time. I hear too many stories of people not getting the car to idle or run half way decent after the install.
Does anyone want to try and meet tonight?
Jpeek- Nice work on the Mafft Pro glad you got it running in such a short time. I hear too many stories of people not getting the car to idle or run half way decent after the install.
Does anyone want to try and meet tonight?