Help removing power steering belt

[caballo]

Well, im following this set of directions http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=EM&P=23 all for the purposes of setting up the timing. But im having problems in step 6. I cant seem to find the bolts needed to loosen the power steering pump. Im not really understanding this diagram here http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=SR&P=45

Anyone have a better diagram or picture so i can locate the bolts?
thanks

 

[AJ'S 88NA]

It's the big bolt #590 that you have to loosen from the back side of the pump. And the adjustment bolt on the front.

 

[caballo]

I removed those two bolts already. The pump did have some slight foreplay after removing them, but not enough to remove the belt. I noticed that the pump is hanging on from two 14mm bolts that are attached to the block. I removed one of the bolts, but the other im having a really hard time unbolting. lol