ForcedTorque's Slick/Quick Build
- Thread starter ForcedTorque
- Start date
ForcedTorque;1316676 said:
Brake clean/contact cleaner is a great product to use for all kinds of cleaning. Just be sure to keep it away from most rubber material. Tends to make it expand larger then its supposed to be.
gtsfirefighter;1316710 said:
+1 on that, if you can get the seal out w/o damaging the machined sealing surface on the crank or the surface where the seal is pushed into, do it that way. Will save alot of time and effort.
I just got a tracking number from Zumtizzle. I should have my rear main seal here today or tomorrow. It'll probably be the weekend, as I have too many end of the school year functions to run around to this week. But who knows, I may be working by shop light tonight. No real rush, as I have to wait until I find a new harness to proceed. I also need to figure out how to get power into the car as well.
Any tips on getting the old seal out of the retainer. It is much more brittle than I thought it would be. I'm glad you guys talked me into replacing it. I'm having fun trying to get the small lip out on the outside.
Oh, and here is the lost rear seat picture. It shows the color of the shadow cloth a good bit better. I also put my JDM floormats in it for a little floor contrast.
Oh, and here is the lost rear seat picture. It shows the color of the shadow cloth a good bit better. I also put my JDM floormats in it for a little floor contrast.
gtsfirefighter
SM Expert on White trash
gtsfirefighter
SM Expert on White trash
Weekend progress
What weekend?
I got my AFC NEO, Turbo Timer, and Greddy Boost Controller all pulled from the old car, and wired in to the new car.
I got my rear main seal out, and the retainer cleaned up. But, the new gasket I have would not cooperate with me. It doesn't look like it is the right one. On the outside, it looks a little too small, and the inside doesn't look right at all. I brought it all with me, and plan to go to the parts store today and see if I can get it straight.
I also did a lot of work on the old car. I got the dash removed for Jay, and all of the rest of the parts that I have sold off of it. Then I pulled some more parts from the car to swap over to mine, like my AEM Eugo and new Boost Gauge pulled, but not yet swapped in. I planned to get a lot more done on Sunday, but plans changed late Saturday night. My son is having graduation tomorrow, and due to the ex-wife being in town, I was uninvited to his church ceremony and luncheon because she was going. Well Saturday night, I found out it was only my wife who was uninvited, and I could go. After that he had a graduation party at the ex-in-law's place. The wife was able to attend that one. Nothing better than a day with the ex-wife, while wishing you were working on the car, but I was there for my son only.
What weekend?
I got my AFC NEO, Turbo Timer, and Greddy Boost Controller all pulled from the old car, and wired in to the new car.
I got my rear main seal out, and the retainer cleaned up. But, the new gasket I have would not cooperate with me. It doesn't look like it is the right one. On the outside, it looks a little too small, and the inside doesn't look right at all. I brought it all with me, and plan to go to the parts store today and see if I can get it straight.
I also did a lot of work on the old car. I got the dash removed for Jay, and all of the rest of the parts that I have sold off of it. Then I pulled some more parts from the car to swap over to mine, like my AEM Eugo and new Boost Gauge pulled, but not yet swapped in. I planned to get a lot more done on Sunday, but plans changed late Saturday night. My son is having graduation tomorrow, and due to the ex-wife being in town, I was uninvited to his church ceremony and luncheon because she was going. Well Saturday night, I found out it was only my wife who was uninvited, and I could go. After that he had a graduation party at the ex-in-law's place. The wife was able to attend that one. Nothing better than a day with the ex-wife, while wishing you were working on the car, but I was there for my son only.
gtsfirefighter
SM Expert on White trash
Is your ex a bitch? Who did all the "univiting"? None of my business I know but damn, why do people have to be that way?
Well.......If she wasn't a bitch and POS, I might not have custody of my son since he was 1 1/2 yr old. The church luncheon (supposedly) was for the graduate and two parents only. My wife had talked to my son on the phone while we were out the other day, and he said his mother wanted to go. My wife said, "So, are we being replaced", to which he said yes. Then Saturday night, I get a call from my Mom, saying he is upset that I wasn't going??????? So there was a misunderstanding somewhere. Once I knew he wanted me there, I was there. Don't think I didn't let him know right quick if he had a problem with me, he needed to bring it to me, not go tell my Mommy on me.
Hey Scott,
Thats odd. I remember holding that seal up to a Toyota seal and it was the same just with a different color.
That was a long time ago though....................
Sumeet
Thats odd. I remember holding that seal up to a Toyota seal and it was the same just with a different color.
That was a long time ago though....................
Sumeet
I did get the seal taken care of today. As it turns out, I didn't realize that the grove I was trying to get the outside edge into, was actually the metal center of the old gasket. I knew that I had somewhat torn a small piece of the skin on the outside edge hitting it with a hammer with several rags for protection. But, I didn't realize that it had dented as well. I bought a new one, and got it installed after the guy at the parts store pulled the old ring out. The gasket was right, it was just my inexperience with this seal. I just got home from work, and I'm gonna eat first, then the seal will get installed on the motor tonight. Hopefully in the next few days I will have my tranny mounted back up to the motor, and all of my other little projects finished by Sunday evening.
Then it will be just a matter of finding the right wiring harness to fit this car, and putting all the wiring from the entire front end back together. He had pulled it all so he could one day paint the bay. I won't be doing that this time, as I feel this paint will clean up just fine.
Then it will be just a matter of finding the right wiring harness to fit this car, and putting all the wiring from the entire front end back together. He had pulled it all so he could one day paint the bay. I won't be doing that this time, as I feel this paint will clean up just fine.
I did get the rear main seal in, mounted and torqued the flywheel, and got the tranny mounted up to the motor today. Tomorrow, I will go after the valve cover gaskets, and pull the turbo back off to get gasket where it goes on the turbo oil drain. Once those are done, it will all be wiring from there. I believe I have located a nice 91-92 harness, but the guy is not yet ready to sell it. That will give me a little time to sell my 89 harness so I can pay for it.
Scott, looking good on the new build. Wishing i was as far along as you are with my bolting everything back together
gtsfirefighter
SM Expert on White trash
Ok, I've been trying to be quiet but I think we are due some updates, even if it's just to say you haven't done shit.
BTW, I'm going to be in Gulf Shores the second week of July. You better be available!!!
BTW, I'm going to be in Gulf Shores the second week of July. You better be available!!!