Finally getting started!

D

Doward

Banned
Jan 11, 2006
4,245
0
36
Alachua, FL
HOLY TOP END BATMAN!

*Hell* of a lot better with the 2.5" hardpipes, giant Driftmotion IC, and 57 trim turbo!

9psi in a flash, and away she goes!

Just for the record, this is the first and only time I'm going to boost, until I get everything else settled in first. But man, what a rush :)
 
D

Doward

Banned
Jan 11, 2006
4,245
0
36
Alachua, FL
So far so good. :) It'll be next week before I get to really run it. That short burst was a hell of an improvement over what I had before, though!
 
D

Doward

Banned
Jan 11, 2006
4,245
0
36
Alachua, FL
OK so this weekend's fun -

NEW TARGA SEALS YO! I'm happy about that :) Walbro 255 going in as well - no pics yet, but the fuel tank is out ;)
 
p5150

p5150

ASE and FAA A&P Certified
Mar 31, 2005
1,176
0
36
Central Idaho
Doward said:
Hahhahaha, no.

p5150 and I have gone round and round a couple times now on the board over various things, and we finally decided to settle it the old fashioned way - a good old grudge race ;) Not thinking he's gonna show, though :(

Jon, don't get too happy yet - the car hasn't actually moved, just done a bunch of idling, while I get the tip-in setup :) Car's going to travel later today, though!
Click to expand...

Sorry bro - I cant make it. I live in Washington (State) and my car doesnt run right now anyway because im in the middle of a swap.
 
D

Doward

Banned
Jan 11, 2006
4,245
0
36
Alachua, FL
Heh... no updates in a month... why?

DATALOGGING, TUNING, and ENJOYING THE HELL OUT OF IT!

Boost controller finally goes in tomorrow, and Saturday I'm hoping for a couple shake down runs, to see what I'm working with here :)

9psi runs to start. If I get the boost controller in tomorrow, I might indulge in a few 13-14psi runs, if I don't hit fuel cut!

p5150, get down here once you finish that swap, so we can settle this :D
 
D

Doward

Banned
Jan 11, 2006
4,245
0
36
Alachua, FL
Now tuning to the tune of 16psi runs :)

15psi @ 3800rpm, 11.3 AFR. :) This thing has some more get up and go than it's used to...

Catch can (need to order), DDP (arrived today), AN lines (arrived today), 550cc injectors (arrive Wednesday), and an Aeromotive AFPR kit (arrives Wednesday) still to come.

Spring break is going to be fun :) I probably should order a MHG, as well - running a Felpro @ 103lbs/ft ARP studs (used 30 wt oil)

More pics on Wednesday :)

Oh btw - is it wrong that I get on it, and jump off the throttle, just to hear the Greddy Type S sing?
 
D

Doward

Banned
Jan 11, 2006
4,245
0
36
Alachua, FL
Bolted up underneath, where (I believe, I'll check tonight) the oil cooler lines used to bolt up. The bigger IC required me to relocated (and improve) the oil cooler, so no big deal for me :) I can get you pics underneath, if you'd like?

I'll get over the BOV I know... for now, it's a new toy :)

550s and AFPR kit should arrive today!
 
D

Doward

Banned
Jan 11, 2006
4,245
0
36
Alachua, FL
So Spring Break is here!!

R154 rebuild - almost finished (gotta get down to the shop to use the press for the bearing removal)
New clutch master/slave/clutch lines - CHECK
Clutch - 6 puck ceramic, CHECK
Flywheel - 12lbs CroMo, CHECK
550's - CHECK
Aeromotive AFPR - CHECK
57trim running good - CHECK
Traction - :confused:

16lbs of boost from the 57trim, into the stock injectors still. I've got to do some fancy re-wiring over SB (replacing my wiring harness), then I need to get a timing map before I go swapping the 550s in. The Aeromotive AFPR can go in pronto, though, as can the 5 speed. I really need to get a set of drag radials, though :3d_frown:

Goal: Fastest Supra in Gainesville. Jeff, sorry bud, but you're going down! :evil2: Once that's accomplished - look out, Reign. You'll be next on my list of kills ;)
 
You must log in or register to reply here.
Top Bottom