I need 1J pics with the DM 60-1 turbo kit installed. Specifically of how the oil lines are attached to both ends. :1zhelp:
Adam
Adam
Driftmotion 1JZ 60-1 Single Turbo kits installed pics
- Thread starter honestabe
- Start date
honestabe;1379392 said:
Why Adam? Problems? Do I need to go up there and do the install for you? :nono: lol.
well i dont have pics but i can tell you how to mount the oil lines. first off youll need to mount the 90* hose extension onto the turbo first. loosen both the exhaust and compressor housings so you can clock it correctly (not extreemly loose just a hair loose so you can rotate it). when its in (90* hose) it will be perfectly between the compressor housing and exhaust mani then tighten (must mock up the turbo at this point). the oil feed line will go from the front port on the block looped as close to the fender well as possible and install the oil feed fitting then the oil line. clock the center section to get it level as possible then tighten 1 or 2 of the comp & exh housing bolts pull turbo off tighten everything then reinstall turbo connect drain upper fitting first to the turbo then to the oil pan. your done.
LOL Jonathon, I'm just a little confused as to how to mount everything and where it all goes.
Panchira!, thank you very much. My friend Trevor (northwestsupra) is coming over later to help me out.
Panchira!, thank you very much. My friend Trevor (northwestsupra) is coming over later to help me out.
Did you get it figured out from those pics Adam? Its not hard, just a few lil pita things that you have to do with any turbo.
I'm working on it Todd. My buddy Trevor will be here in 20 minutes to help me out. BTW, thank you for the help. I got the heater hoses ran and they look good.
Got it all figured out thanks to Todd and Trevor. Big thanks to Quin for figuring out what car uses the oxygen sensor I need since the stock o2 sensor is the bolt in type and I need the screw in type (93 Ford Mustang 5.0).
Hey man, how about a few pics of the routing now that you got it figured?
I'm in the same boat you were ealier and as you know a pic is worth a thousand words.
:icon_bigg
I'm in the same boat you were ealier and as you know a pic is worth a thousand words.
:icon_bigg
Sure. Look in my build thread and see if there's any pics you want me to take that isn't already in it.
Flateric;1380626 said:
The last ones in this gallery are the ones I sent him.
http://viewmorepics.myspace.com/ind...viewPicture&friendID=17329038&albumId=2712321
