Custom fuel pressure regulator adjustable

[jailbird25]

see you on the pictures...this FPR is a costum made in germany.
He can made a fuel pressure from 2 Bar-max.6Bar on the injectors.
Plug n play for the stock fuel rail on the 7MGTE.....

 

[theKnifeArtist]

hmmm...

 

[jailbird25]

easy to adjust...with the screw on the top.

 

[theKnifeArtist]

looks promising...i'll wait for the experts to speak

 

[jailbird25]

for the experts:

 

[donnys90T]

Easy to do. I've done a few the same way.

 

[pimptrizkit]

looks like it would work,

i personaly like the look of the remote regulated and fuel pressure gauge.

 

[MDCmotorsports]

Ive seen this before way back in the day. This was credited to Dean Marcum (IIRC) and then HKS jumped on the bandwagon.

I have personally seen these types of modified stock regulators fail.

 

[dbsupra90]

Ive seen this before way back in the day. This was credited to Dean Marcum (IIRC) and then HKS jumped on the bandwagon.

I have personally seen these types of modified stock regulators fail.

same here.

not sure about dean, but i know dave hall used to sell them back around 1999. i had thought reg in canada had them as well, but not 100% on that one. perhaps those were the hks versions? he is hardcore hks.

either way, i know 3 people that have lost their motors on mod'd stock regulators. sorry mate, i just dont trust them.

 

[Mr. Y]

Well, even in Russia we have custom made AFPR's (sorry, no picture). Friend of mine on local factory modded stock unit and it works fine =)
I don't think it is very hard thing to do, if you have some skills and equipment.

PS: sorry for my English...

 

[MDCmotorsports]

Well, even in Russia we have custom made AFPR's (sorry, no picture). Friend of mine on local factory modded stock unit and it works fine =)
I don't think it is very hard thing to do, if you have some skills and equipment.

PS: sorry for my English...

Would like to see some pictures.

Your English is fine.

 

[jetjock]

Da, On govorit ochen xorosho.

 

[Mr. Y]

2 MDCmotorsports and jetjock: LOL
I'll grab some pics in evening and post them.

 

[drjonez]

see you on the pictures...this FPR is a costum made in germany.
He can made a fuel pressure from 2 Bar-max.6Bar on the injectors.
Plug n play for the stock fuel rail on the 7MGTE.....

good luck w/that. there were quite a few of those back in the day, most of which ended up in the trash bin after destroying the engine they were installed on.

 

[IJ.]

While I admire people that make their own parts, on something as critical with the potential to do as much damage I just don't get trying to save some $$$

For $300 you can have a very good reliable FPR that won't flutter or lean the motor out, what's your motor worth to you?

 

[drjonez]

$300? heck $130!

 

[IJ.]

I looked for the most expensive

 

[drjonez]

i like to cheap out on my fuel system!

 

[IJ.]

LMAO

 

[dbsupra90]

While I admire people that make their own parts, on something as critical with the potential to do as much damage I just don't get trying to save some $$$

For $300 you can have a very good reliable FPR that won't flutter or lean the motor out, what's your motor worth to you?

yes, thats exactly what i was trying to say.

there was a local guy that used vise grips on his return hose. it was adjustable too! if he needed more fuel pressure he just clamped them down harder. true story.