Ct26-60 trim dyno results....;)

[wardog]

UPDATED VIDEO 1-21-10

Well, finally got the time to hit the dyno.This is my supra with a Fresh Engine Ct26-60 trim , k&n intake , Bic DDp, catless 3 in, 2.5 hard pipes, Big front mount,Walbro 255 hp, 550s, Aeromotive AFPR, HKs 2mm MHG, arp HEad studs, ngk wires, MAFt pro speed and density conversion plus lc1 wideband, Hks evc ez boost controller, stock clutch with 6 puck disk and thats all I Think............run was at 18 psi 431.74 rwhp and 426.47 rwtq on a dynojet


I FINALLY UPLOADED A GOOD VIDEO 60mph to 130 mph in 3.5 seconds check it out.

 

[wardog]

I just uploaded the video and its SUPPOSED to get better quality...

 

[lewis15498]

The audio made that video painful to watch. Nice job regardless.

 

[Supra28]

Damn, those are some great numbers! CT FTW!

 

[wardog]

Just posted dyno sheet. More videos on the way sorry for the audio on the video. I got about 3 more hopefully I can upload a good one and thanks. Hope they are good numbers :beer:

 

[boosted2085]

18 psi@431.74 rwhp and 426.47 rwtq



Your welcome for the tune :naughty:

 

[MRSUPRA]

Great numbers!!

 

[92nsx]

video and sound still sucked But DAM those are fing awesome #'s for that turbo.

 

[kamikazemkiii]

Great numbers
whats wrong with the speedometer?

 

[supranasty]

Wardog great numbers. Thats what I hope to make on a dynojet. Tune my car will you . 7m ftw .

 

[steven89]

Congrats on the numbers!! Whered you get it tuned at? I need to get mine tuned. =p

 

[Fuzz420]

Thats some good numbers, but a very nice broad power band. Good work

 

[wardog]

Thanks everybody, but a very special thanks to a good friend BOOSTED2085 for the tune. We went out last thursday night and we couldnt get the computer cable for the MAFTpro so we just tuned it from the controller itself. After the first dyno run which was 425 rwhp, i adjusted the rest to achieve the 431rwhp. NOW the i saw what the ct26-60 trim can do , its HOLSET Hx35 or HX40 TIME.......

 

[wardog]

Hey steven what fuel computer are you running?? Let me know, we can take a look at what you got and go from there .

 

[Zazzn]

good numbers man

 

[heyitsdatguy]

Great numbers
whats wrong with the speedometer?

+1

What's wrong with your speedometer. It seems to go up too fast.:icon_razz

 

[foreverpsycotic]

Wow, very nice numbers for that setup, did you port the manifold at all?

 

[wardog]

I didn't port the maniforld at all. Its an ATK engine and head . The speedometer looks nasty from 60 to 130. I hope im a good driver and break into the 12s with this set up.

 

[steven89]

Hey steven what fuel computer are you running?? Let me know, we can take a look at what you got and go from there .

Ive got a SAFC II. Im about to buy a Innovate SSI-4 [4 sensor interface to read RPM, boost, TPS, and one more input i havent decided on yet.] Ive already got a Innovate LC-1. So coupled with the SSI-4 i'll have 5 parameters monitored in car.

Man, any help with tuning would be greatly appreciated! What part of Houston you in?

0o0o you're getting rid of the 60 trim? how much? how many miles? :naughty:

 

[wardog]

Thats a good system. I live in Humble for right now im about to move to downtown inner loop area. I got a couple of things to fix on my car and my 97 trans am ws6, but ill get with you when we can go out to dattalog some runs.