Car gets too hot

[88-7MGTE]

Hey guys.
I have a -10 oil cooler lines with a filter relocation, but when it has been on the car it looked like it drops the oil pressure.

Right now my mechanic suggested to run without the oil cooler but when i drive the car for 10 min it looks like the car get pretty hot, i myself think it gets 2 hot for what it should be, so i don't drive the car at all now.

Shoul i just get a small 9 or 7 row cooler with 5/8 lines (with thermostat) and try to run the car with the small cooler ? shoul this be the cause for the car to get too hot ? and also oil press. drop ?

Thanks
Sady

 

[Zumtizzle]

how much did it drop the pressure?

and do you have a thermostat?

 

[grimreaper]

what oil psi levels are you getting?

how does it "look" hot?

how about some measurements!!

 

[ATL88Supra]

Put the damn oil cooler back on

make sure your cooling system is working right.


come on people wise up or part out

 

[grimreaper]

personally i think your mechanic is 7m dumb...

2nd thread about your oil psi based on your "mechanic"... google "tsrm" and read the lubrication section...

 

[88-7MGTE]

It dropped under 5 psi on cold idle! hot idele didn't move much
now its looks a little high.

I don't want to put the oil cooler back on because of the 2 psi, to low!


GRIMREAPER i did read on trsm i know the basics ok
but i want to know my options before i do something i did put too much money in this pit to fuck it up.

 

[88-7MGTE]

how much did it drop the pressure?

and do you have a thermostat?

no thermostat yet i want to know the plan before i do anythink. I do know basically what i want to do but i just wanted to know your opinion.

 

[88-7MGTE]

Put the damn oil cooler back on

make sure your cooling system is working right.


come on people wise up or part out

lol keep dreaming buddy!

 

[jdub]

If you are going to upgrade your cooler circuit (and eliminate the stock filter head pressure bleed), you want to do it like this:
http://www.supramania.com/forums/showthread.php?t=62838

That said, your mechanic is an idiot...I'd get a new one

 

[grimreaper]

where are you getting your readings from and with what gauge? (stock, after market, electrical?)

 

[88-7MGTE]

If you are going to upgrade your cooler circuit (and eliminate the stock filter head pressure bleed), you want to do it like this:
http://www.supramania.com/forums/showthread.php?t=62838

That said, your mechanic is an idiot...I'd get a new one

Thanks, and i did!

where are you getting your readings from and with what gauge? (stock, after market, electrical?)

Autometer mechanical after market.