Got to remove the ones on the windows that I purchased from a member to replace my clear ones that had scratches on them b/c it came off both window tracks.
thanks guys.
thanks guys.
Poodles;1553381 said:Side windows aren't layered like the windshield so it should just be on the inside (and I doubt it's factory). The only window that's tinted from the factory is the back hatch.
92nsx;1542075 said:How to remove tint.
![]()
first start picking at it until a corner lets lose and start pulling.
![]()
Once off throw it on the ground at walk on it. The window will still be sticky from the adhesive
![]()
Hose down the window once tint is removed with windex to make the next step easier.
![]()
Get out a NEW sharp razor blade and start scrapping the window to remove the adhesive. A 15-20 degree angle works good.
![]()
Once done do it again to insure that all adhesive is removed, and clean window.
![]()
This will help keep the cops happy. (The rear tint stays)
![]()
Jeff Lange;1554314 said:As far as I'm aware, there is the bluish/gray tint, bronze tint, and gray tint for the factory glass, the tint is always in the glass and non-removable.
Which colour you have depends on the year and interior colour.
That being said, in North America only the Bluish/gray and Bronze tints were ever used. In Europe/Australia, etc. only bluish/gray was ever used. In Japan, all 3 were used.
Jeff
IJ.;1554859 said:Front is Top tint/Clear, sides and back are Green so maybe that's what they mean?
(Front tint is illegal here)