Got to remove the ones on the windows that I purchased from a member to replace my clear ones that had scratches on them b/c it came off both window tracks.
thanks guys.
thanks guys.
Poodles;1553381 said:Side windows aren't layered like the windshield so it should just be on the inside (and I doubt it's factory). The only window that's tinted from the factory is the back hatch.
92nsx;1542075 said:How to remove tint.
first start picking at it until a corner lets lose and start pulling.
Once off throw it on the ground at walk on it. The window will still be sticky from the adhesive
Hose down the window once tint is removed with windex to make the next step easier.
Get out a NEW sharp razor blade and start scrapping the window to remove the adhesive. A 15-20 degree angle works good.
Once done do it again to insure that all adhesive is removed, and clean window.
This will help keep the cops happy. (The rear tint stays )
Jeff Lange;1554314 said:As far as I'm aware, there is the bluish/gray tint, bronze tint, and gray tint for the factory glass, the tint is always in the glass and non-removable.
Which colour you have depends on the year and interior colour.
That being said, in North America only the Bluish/gray and Bronze tints were ever used. In Europe/Australia, etc. only bluish/gray was ever used. In Japan, all 3 were used.
Jeff
IJ.;1554859 said:Front is Top tint/Clear, sides and back are Green so maybe that's what they mean?
(Front tint is illegal here)