Can you buy this part from toyota?

[suprajjang]

Well basically my seal has a bubble in it and when i drive there is too much wind noise. Can i buy this part by itself from toyota? I circled and put a arrow to the part i need in this picture

thanks again

http://i28.photobucket.com/albums/c211/suprajjang/123.jpg

 

[CRE]

I believe you can. However, the rubber has metal inside. You can just pinch it with your hand (a lot of pressure) to tighten it back down.

 

[BigTree]

Just did mine a few weeks ago.


1. Put your window down
2. Get some pliers but put some cloth on the teeth.
3. Slowly apply pressure to area until it bends inwards
4. Make sure window still goes up and down without too much trouble.
5. Celebrate with beer
6. Repeat 5

 

[Poodles]

same...

 

[willfish]

maybe use some silicone cocking to fix it ?

Will

 

[miekedmr]

maybe use some silicone cocking to fix it ?

Will

where can I get some cocking?

 

[willfish]

home depot, any hardware store....
just guessing,

a tube uf cocking 8 bucs,
cocking gun 2 bucs.

unless your being sacastic....


Will

 

[Ric]

I just bought a new one of those pieces for my wife's BMW, it was like $45 bucks. Her's made alot of wind noise also.

It replaces the whole window track up front. My wife did it herself in like 15mins, so I think you should be able to also.

 

[Mr. Sinister]

where can I get some cocking?

lol. You live in NY. I would expect on many street corners.

 

[Superjustin13]

where can I get some cocking?

i was about to say, my pants


but yeah use something type of Silicone for a stupid fix, and that piece from toyota's like 147??? IIRC

 

[Ric]

OMFG are you serious you guys are going to use window chalk on a car window? someone freakin lock this redneck thread.

 

[willfish]

OMFG are you serious you guys are going to use window chalk on a car window? someone freakin lock this redneck thread.

what are you saying there chief ?

Will

 

[Ric]

You guys wonder why MK3's get no respect

 

[Big Wang Bandit]

^ Truth.


Fix it right people. Sheesh.

 

[Jeff Lange]

On a side note, I don't know if that piece comes with the mirror mounting bracket or what, but I haven't had any luck finding that rubber. I'm still looking into it.

 

[miekedmr]

I said cocking, not caulking.

my pants

Thx

 

[CRE]

On a side note, I don't know if that piece comes with the mirror mounting bracket or what, but I haven't had any luck finding that rubber. I'm still looking into it.

The rubber is molded to the mounting bracket.

 

[suprajjang]

CRE and BigTree thanks for the tip. Just finished mine in like 30 seconds and its good as new:icon_bigg Thanks again!!!

 

[Ckanderson]

finished? you didnt do any cocking... did you?

 

[Jeff Lange]

The rubber is molded to the mounting bracket.

In that case, part numbers are
67513-14012 and
67514-14012

They're about $70 each from Champion or other online dealer.