CajunKenny's Build Thread
- Thread starter CajunKenny
- Start date
I know that OBX and Fidanza aren't big hitters in the Cam Gear world; but, those two are my favorite looking ones. 
The stocker is more Meth Friendly than a FF. Plus, mine is a wee bit on the rare side.
But don't think for a second that I haven't thought long and hard about it!
But don't think for a second that I haven't thought long and hard about it!
CajunKenny;1614779 said:The stocker is more Meth Friendly than a FF. Plus, mine is a wee bit on the rare side.
But don't think for a second that I haven't thought long and hard about it!
Kenny,
You may have presented perfectly reasonable facts, however.. consider this..
The stock intake manifold is gay!!
Thanks,
Mike
Yea - It is gay for sure. It's all about FFIM envy. Just think, less turbo lag and a cleaner engine bay.
So Kenny, when you succumb to the gayness of your Stillen modded intake Mani let me paypal you so you can send it to on to Alabama? My red 91 will be glad to bling that gayness.
So Kenny, when you succumb to the gayness of your Stillen modded intake Mani let me paypal you so you can send it to on to Alabama? My red 91 will be glad to bling that gayness.
Hey Kenny, everything is looking great! The intake you have is far from stock and should work great with water meth. You might want to look at the Labonte kits, they look good.
One of these days I'll send you the rear seats, been balls to the wall all summer with work with no time to even cut the grass. Keep up the good work, it's been nice to see your progress and I envy your running Supra.
One of these days I'll send you the rear seats, been balls to the wall all summer with work with no time to even cut the grass. Keep up the good work, it's been nice to see your progress and I envy your running Supra.
Thanks Fred. Last November, I went ahead and bought AEM's Meth Kit. They were having a sale and I couldn't pass it up! I haven't installed it yet because I'm still trying to round up enough information to be safe. There are NO resources local to me. The only Tuning Shop has never tuned with Water/Meth so there's no way I'm taking it there. They don't even monitor knock outside of DSM's and Honda's ECU's.
Busy is good, right!? I'm glad you reminded me about those seats! Just let me know when they're headed my way and I'll get you some cash!
For now, I have that ATI Damper in my sights!
Is there a time frame on your ride? I can't wait to see and hear this beast!
I wish we lived closer. That would make all of this a whole lot easier!
Busy is good, right!?
I'm glad you reminded me about those seats! Just let me know when they're headed my way and I'll get you some cash! For now, I have that ATI Damper in my sights!
Is there a time frame on your ride? I can't wait to see and hear this beast!
I wish we lived closer. That would make all of this a whole lot easier!
Busy is great! Helps to add funds to the build. Still not on the road but close, just more $$$$$.
Have you talked to Duane about a tuner up his way? Might be a drive but I would think it would be worth the time.
Let me know about the ATI, as I said before the shop is about 15 mins. from my house and I can check to see when they are running their sales. I did buy one for the SC 300, tight fit! And that car still isn't running right. I think the ECU is bad. Might go to standalone-AEM in it AFTER the Supra is done.
Don't even think about the $$ for the seats, they need a good home. Let me know if you need the rear seat belts also. Eventually I'm putting an 8 point cage in the car so the rear sides etc. will be sitting in the basement.
Agree about the distance, coast to coast is a LONG haul. But it would be great to see both black '91's with the sunroofs open side by side. Bye the way, I've asked Paulo-Retro Spec to consider making a CF sunroof lid. Might be interesting.
Have you talked to Duane about a tuner up his way? Might be a drive but I would think it would be worth the time.
Let me know about the ATI, as I said before the shop is about 15 mins. from my house and I can check to see when they are running their sales. I did buy one for the SC 300, tight fit! And that car still isn't running right. I think the ECU is bad. Might go to standalone-AEM in it AFTER the Supra is done.
Don't even think about the $$ for the seats, they need a good home. Let me know if you need the rear seat belts also. Eventually I'm putting an 8 point cage in the car so the rear sides etc. will be sitting in the basement.
Agree about the distance, coast to coast is a LONG haul. But it would be great to see both black '91's with the sunroofs open side by side. Bye the way, I've asked Paulo-Retro Spec to consider making a CF sunroof lid. Might be interesting.
Kenny, you keeping A/C with the ATI damper? All the pics of it only look to have 2 belt sections..
whitemike;1615849 said:
You can run A/C with the ATI. The A/C section bolts to the main section and can be deleted.
John Reed does duanes tuning. He is out of Portland so not too far from you ken, but good luck getting ahold of him
Sorry everyone. I've been away on vacation.
I haven't talked with Duane yet. I want to get a few more goodies on the car before I look in to that.
I'll be hitting you up on the ATI pretty soon I think. I sold my springs, spare sway bars, and a spare TEMS strut to a buddy and used the money to put a deposit down on a set of Zankoku's Coilovers.
I insist that you let me at least cover the shipping on the seats. No rush on them of course...
Two Black 91's with the tops open would be pretty sweet indeed! Hmm...a Carbon Fiber would be interesting. It would likely compliment a CF hood nicely.
No doubt he's got bigger fish to tune than CajunKenny's car!
Oh come on now... I'll be installing my new cam gears and plumbing in a new water temp sensor pretty soon. Will that keep you coming around?
SWD Fredester 3;1615824 said:
I haven't talked with Duane yet. I want to get a few more goodies on the car before I look in to that.
I'll be hitting you up on the ATI pretty soon I think. I sold my springs, spare sway bars, and a spare TEMS strut to a buddy and used the money to put a deposit down on a set of Zankoku's Coilovers.
I insist that you let me at least cover the shipping on the seats. No rush on them of course...
Two Black 91's with the tops open would be pretty sweet indeed! Hmm...a Carbon Fiber would be interesting. It would likely compliment a CF hood nicely.
GC89;1615955 said:
No doubt he's got bigger fish to tune than CajunKenny's car!
whitemike;1618213 said:Ah this thread is so boring now
Oh come on now... I'll be installing my new cam gears and plumbing in a new water temp sensor pretty soon. Will that keep you coming around?