Blow Offs
- Thread starter aidanair
- Start date
yep...I have the blitz with that adapter too, its loud and makes the PHSSSS sound you want. I'm at about 10 psi.
Turbo XS are cheap and loud, my brother had one on his RX7 and didn't have any problems with it. He was running it on stock turbo.
I have an HKS SSQV recirculated in to the stock nipple on the accordian intake hose. it makes a nice WHOOSH sound when it opens.
Here's a video of my car on the dyno for baselines. It does a full 2-stage blow off (if that makes sense, I'm a n00b
) on the main pull at the end of the video after the Mk4 makes a pull, about 2:10 in.
http://youtube.com/watch?v=9qnDkWvsNxQ
Here's a video of my car on the dyno for baselines. It does a full 2-stage blow off (if that makes sense, I'm a n00b
) on the main pull at the end of the video after the Mk4 makes a pull, about 2:10 in.http://youtube.com/watch?v=9qnDkWvsNxQ
Just changed from Hks ssqv to Bosch 110 recirculation valve and man Im loving the difference. No horspower gain but the response difference. The hks dumped to the atmosphere had a ton of shift lag. The Bosch almost nothing. And i paid $10 for it.
1st off- im totally against turboxs. i think its a cheaper brand- like turbosmart. my buddy had bad experince with turboxs bov on his dsm.
i really dont know if i wanna sell it yet- it comes mounted on a pipe that goes between 3000 pipe and fender. there r 3 people wanting to buy it.....ill think about it though. lol
i really dont know if i wanna sell it yet- it comes mounted on a pipe that goes between 3000 pipe and fender. there r 3 people wanting to buy it.....ill think about it though. lol
I think on the cheap the best bov you can buy is a the stock one off of a 1st gen dsm. Stock they will hold around 20psi and modded you could get them to hold up to 30psi. They also make a very nice woosh sound.
Check driftmotion he has a lot of replica bovs for cheap. Otherwise the bosche by-pass valve or I have heard about the 1g dsm valve. Its visibly larger for sure.
The car will RUN better with a by-pass valve.
The car will RUN better with a by-pass valve.
i have stock intercooler piping.. i called up the guy from suprastore.com and he said i need the super-sqv bov because of the piping. he said i dont need to weld anything. any others i can do with stock piping? plus i dont have to do any welding with this one correct? what tools do i need
Last edited:
suprastore.com sells a small section of pipe that is flanged for the HKS bovs. It just replaces a section of the stock pipe.
yeah they are perfect for a good reliable great sounding bov. i have one with an adaptor to use with stock 3k pipe pm if interested.Red7m said:
-Zac
Wheres the cheapest place to purchase the bosch bpv? I checked ebay and they dont say which series (110, 103, etc.) Also has anyone tried the alumminumone that supposed to be slightly better?
look for the part numbers
I just bought on ebay two weeks ago for $10 and it works perfectly . http://cgi.ebay.com/ebaymotors/SAAB...ryZ33742QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
found one for you same person i got mine from.
I just bought on ebay two weeks ago for $10 and it works perfectly . http://cgi.ebay.com/ebaymotors/SAAB...ryZ33742QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
found one for you
same person i got mine from.do i go with
a) http://cgi.ebay.com/ebaymotors/ws/e...STRK:MEWA:IT&viewitem=&item=160160103598&rd=1
or
b)http://cgi.ebay.com/ebaymotors/ws/e...m=260163562501&ssPageName=STRK:MEWA:IT&ih=016
btw i have stock intercooler piping and a very low budget but i may get a front mount in the next 6 months
a) http://cgi.ebay.com/ebaymotors/ws/e...STRK:MEWA:IT&viewitem=&item=160160103598&rd=1
or
b)http://cgi.ebay.com/ebaymotors/ws/e...m=260163562501&ssPageName=STRK:MEWA:IT&ih=016
btw i have stock intercooler piping and a very low budget but i may get a front mount in the next 6 months
does anyone know if this will fit the mkiii properly
http://cgi.ebay.com/ebaymotors/GRED...ryZ33742QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/GRED...ryZ33742QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
aidanair said:
that greddy is the one i have.
i wasnt crazy about the bosch. i guess it did its job, but at certain boost/vac levels it would hoooooonnnnnkkk. sounded like a pissed off goose.
any bov will work, you just have to have the correct flange.
be advised, you may have stalling/over rich if you use a non-recirculated bov on a stock type afm.