anyone else using 2 walbros?

[lppro]

I'm trying to mount 2 walbros up in my fuel tank. I've herd of people doing it before but I'm having a little trouble. it seems that the hole is a little to small for both of them to fit.... do i need to trim up the hole?
any feed back would be appreciated...

 

[Jostar]

Yes you have to filed the hole till they fit, That is what i have been told.

 

[lppro]

ok i thought so i guess i heve to figure out how to do that without getting all the shavings in the gas tank... anyone have any pics of there setup?

 

[Jostar]

Well if you have the tank off you can do it & make sure you clean the inside of the tank real good.

 

[lppro]

ya im probably going to rinse out the tank so i can use a grinder and not worry about the sparks hitting left over gas then rinse it out again and let it dry...

 

[adampecush]

rinse with a petroleum solvent, not water. Also, air the tank out for a day before doing anything, this should provide enough time for the fuel/solvent to evaporate.

Clean things up with a magnet and then solvent.

 

[Jostar]

rinse with a petroleum solvent, not water. Also, air the tank out for a day before doing anything, this should provide enough time for the fuel/solvent to evaporate.

Clean things up with a magnet and then solvent.

Smart, very Smart, I agree 100% with this guy.