91T breezen';1316896 said:
Well can you give us a review, comparison? I know they look good but with 8 pistons I hope they throw you into the dashboard!
Another big brake option...
- Thread starter 91T breezen'
- Start date
Well can you give us a review, comparison? I know they look good but with 8 pistons I hope they throw you into the dashboard!
will the K-Sport Big Brake Kit fit underneath 18" x 9" (+38) in front &
18" x 10" (+35) in the rear or will I have a clearance issue. The tires in front are 255/35 and in the rear they are 265/30. Also is there a rear kit or do I just purchase two of these and use one for the rear
Thanks
18" x 10" (+35) in the rear or will I have a clearance issue. The tires in front are 255/35 and in the rear they are 265/30. Also is there a rear kit or do I just purchase two of these and use one for the rear
Thanks
Did you have to removed the dust shields?
These brakes are interesting for european Supra owners since they can be had with a german TÜV approval so the cars can be registered with these brakes. Only problem with the TÜV is that the brakes are very expensive (8.000 USD for a complete set - front + rear).
These brakes are interesting for european Supra owners since they can be had with a german TÜV approval so the cars can be registered with these brakes. Only problem with the TÜV is that the brakes are very expensive (8.000 USD for a complete set - front + rear).
http://www.stillen.com/product.asp?id=BRMBRKIT4P&c=BR&year=1987&make=TOYOTA&model=SUPRA
and you could get the rear bbk adapted from the mkiv.
I've seen the kit in person from stillen this guy at an autocross had them and i snapped some cell pics:
and you could get the rear bbk adapted from the mkiv.
I've seen the kit in person from stillen this guy at an autocross had them and i snapped some cell pics:
SupraOfDoom;1367756 said:
Good enough for Toyota also. Just because it doesn't say so on the rotor doesn't mean it isn't.
speedysupra;1367065 said:
If these rims you speak of, are one of the more recent cast types, i;e Ruff/TSW/Enkei/XXR etc...most of them, with those offsets, should be fine. The only way I could see them not clearing a BBK, would be if they were Hyper low disc, to accomodate a very deep ("true") lip.
I think they make a smaller 6-piston kit for the rear, but unless you road race, it's a waste of money, IMHO.