2JZGE MKIII with 7MGTE Wiring and Electronics

[88supraTT]

it has a turbo, but i just need to figure intake and exhaust piping now

also thinking I should have bought some black wire instead of using yellow i had laying around. once the car runs I'll go through paint and make everything look like a factory engine.

I can see the light at the end of the tunnel :aigo: :aigo:

 

[hottscennessey]

AWESOME!

 

[GeneStarWindGSW]

my 2jz-ge wishes it be like this

 

[bountykilla0118]

so this beast is till on the 7m electronics?

 

[hottscennessey]

yuper

 

[bountykilla0118]

Good .... I am looking to buy a 2jzge for my winter build. Is there away someone can do a full write up?

 

[88supraTT]

when I get this all said and done. I will attempt at making a write up with as much infromation as possible. hopefully will be done in the next couple of weeks.:icon_bigg

 

[supra87t/t4]

Nice Work!

Alternator in stock 2JZ location?

What ignition coils/wires?

 

[88supraTT]

alternator is in 2jz location, ignition....still can't decide

edit: to do list
-ignition
-intercooler piping
-fuel rail modification
-exhast
-oil lines for turbo

there maybe little things left, but I think I'm about 75% done

 

[sao1]

Any updates 88supraTT?

 

[88supraTT]

Any updates 88supraTT?

will get pics this weekend

-fuel rail is done

-ignition is in the place i want it, just need to pick up some new plug wires and mount it.

-received the boost logic oil line kit and somethings of coarse aren't working

-have piping for intercooler

-the biggest problem is mounting a exhaust of some kind.

I can only work on this for a few hours a week because of work, school, and the car is at my parents house 45 min away.


really really want to get this done before winter.

 

[dok33]

Updates? Curious to see if you found a better fitting throttle cable. Also, how did the heater hoses hook up? Haven't seen info posted anywhere on them...

 

[hottscennessey]

On the heater hoses..

Facing the engine bay:

-Left, rear of block.. hooked it to port on passenger side of firewall
-Top of head... used a 90* bend and hooked it to port on driver side of firewall

This may not be the best way, but it was the easiest and has worked great for ~9 months

 

[88supraTT]

its so close, everything is about done

found a downpipe just sent a message to the guy about buying it...4"

Ordered the fitings I need to make the boost logic kit work.

finished hooking up the fuel rail
finished the intercooler piping
ignition, just need to make some ground wires

i think that about somes it up...there is snow on the ground and more supposed to come.

 

[supra87t/t4]

No updates from me, I haven't even logged on here for like 2 months, too many other projects....

 

[dok33]

On the heater hoses..

Facing the engine bay:

-Left, rear of block.. hooked it to port on passenger side of firewall
-Top of head... used a 90* bend and hooked it to port on driver side of firewall

This may not be the best way, but it was the easiest and has worked great for ~9 months

Sounds good to me. So it looks like the '92-'94 Camry throttle cable is the best fit? Found this in a 2j swap thread: http://www.supramania.com/forums/showpost.php?p=804745&postcount=27

 

[mobes]

Josh, I made my own for my 1JZ. I can hook you up if you can't find a Camry one.

 

[dok33]

Thanks, I'll definitely hit you up when I get rolling. I was thinking a bike brake cable might work, I've got a few feet of it in my garage. What'd you use? (sorry for the thread hijack)

 

[mobes]

Thanks, I'll definitely hit you up when I get rolling. I was thinking a bike brake cable might work, I've got a few feet of it in my garage. What'd you use? (sorry for the thread hijack)

I used a bike brake cable with the fittings off of my old 7M cable.

 

[sao1]

88supraTT,

Is the car running yet? Any updates?