2jz na-t megasquirt extra

[nissota]

Nissota

I am trying to emulate youre set up anad am curios what you used to get the wheel mounted to the Crank Pully?

Rusty

I used a similar set up from trigger-wheels.com
http://trigger-wheels.com/store/index1.html?target=d16.html

 

[jzxseven]

i am also megasquirting my 2j with edis. just wondering, what order are your spark plug wires. for example "123456". or what 2 cylinders are paired. thanks.

 

[hottscennessey]

should be 1&6, 2&5, 3&4.

 

[darkspeed]

good to see someone MSnS a 2J; I love the progress I've made with it.
A local megasquirter is doing a 2j in his nissan 240. I'll get some pics up when he's done. He's the one responsible for getting my 6M running primo

good luck with your project

 

[jzxseven]

should be 1&6, 2&5, 3&4.

so from that order, do i just match that according to the edis 6 module.

i.e.
pin 10 (coil a) = 1&6, pin 11 (coil b) = 2&5, pin 12 (coil c) = 3&4

edit:
also what is the idm(pin 2) on the edis module for?

 

[nissota]

so from that order, do i just match that according to the edis 6 module.

i.e.
pin 10 (coil a) = 1&6, pin 11 (coil b) = 2&5, pin 12 (coil c) = 3&4

edit:
also what is the idm(pin 2) on the edis module for?

IDM -Tach signal to dash

 

[The1]

good to see someone MSnS a 2J; I love the progress I've made with it.
A local megasquirter is doing a 2j in his nissan 240. I'll get some pics up when he's done. He's the one responsible for getting my 6M running primo

good luck with your project

Hey Darkspeed...I must put you on my "hang out" list.lol. I was thinking about doing at NA-T swap. (That's actually the motor I needed help pulling in the thread I made in the regional forum). I asked hottscennessey about using a megasquirt system I saw on ebay. Matter of fact, I will hit you up on PM..

*you may continue regularly scheduled posting*

 

[The1]

This may sound real dumb..lol..but could I buy the wiring harness to prewire my car to run megasquirt?? :dunno:

 

[darkspeed]

DB37 with hood

This will break the bank. Go get some wire at Radio Shack, or better yet, Waytek. Have fun

EDIT: Waytek also has these nifty weatherpack connectors (like GM uses)

 

[GraffixWB]

hey all. I have ms2 extra installed on my 2jzge. I'm having a bitch of a time getting it to pick up a crank signal. the new code is supposed to supprt the 24 tooth+360 marker wheel on the dizzy. anyone had any success with this????