2 step/antilag EGT's

[IJ.]

Anyone have any numbers?

 

[quake]

Anyone have any numbers?

very soon

 

[IJ.]

Quake: Make sure you remember this thread soon as you have some data

 

[quake]

Quake: Make sure you remember this thread soon as you have some data

will do just been lazy will be running the msd dis4 with 2 step going 2 use the timing retard function also

 

[Datsrboi]

Anyone have any numbers?

Sorry if this has been discussed but wouldn't an anti-lag kill the turbo faster?

 

[mkIIIman089]

IJ. has a secret stash of money trees in the outback. It doesn't matter.

 

[suprakid24]

12.6 @ 117 mph, is that what your askin for? i use the aem ems

 

[IJ.]

Quake: Get it happening lazy

Dats: That's what I'm trying to figure out.

Colin: Shhh you're not meant to mention that .....

SK24: Ummm I was after EGT numbers

 

[Datsrboi]

Quake: Get it happening lazy

Dats: That's what I'm trying to figure out.

Colin: Shhh you're not meant to mention that .....

SK24: Ummm I was after EGT numbers

I know in rally the STI guys have a system that allows you to turn it off when not needed. So no idea hehe.

 

[Mr. Y]

I'm going to try 2step in September... But may be I'll use rev-limiter only, without ign retard/fuel adding... I haven't much money for new turbo...

 

[gixxer750]

I've seen 950-1000 degree's C on a 5 second two step to 15 psi.

Hope that helps IJ

 

[IJ.]

Chris: Yes thanks heaps that's exactly the sort of info I'm after!

What sort of boost were you seeing?

 

[gixxer750]

15 psi within 5 seconds on drag style 2 step running about 20 degrees retard I believe.

 

[gixxer750]

on a 67mm..

 

[IJ.]

Thanks good info

 

[mk3ukr]

Ian, I have seen EGT 850C on 61mm turbo, 0.68 a/r gas side. Built 0.7bar boost at 4700rpm

 

[IJ.]

Vlad: That's nice and cool!

thanks for the info.