1000hp 7m? parts list?

[89mkiii18]

hmm ok well i have owned my supra now for about 2 years i love this car and could never buy anything better iv dumped a decent amount of money into it to restore the interior and body and what not and have made 365 horse power and 387flbt its a fun car but you always want more...well i just got a huge settlement from my grandmother and its time to build that 7m with 1000 horse power but i need some help getting there i want a streetable car meaning suspension wise i have it down with tien flex coilovers/in car electronic adjustability i have tsw wheels 3 inch lip in the back 1 inch in the front its set for a road coarse but i want to build the motor a little more...heres a parts list i put together that will probably need adjusting let me know....



-Dual q-trim ball bearing GT80 turbo from wotm(supports 1200hp)

-Greddy 4 row front mount

-2.5?3.0 intercooler piping? suggestions?

-hks ssq bov

-hks gtII waste gate

-Titan motorsports ported and polished head

-oversized valves

-teds components 12mm 280 lift exhaust and intake cam

-all titanium valvetrain

-crower forged pistons

-cp .040 oversized pistons

-titan motorsports cncd main caps

-clevite bearings

-electric waterpump with secondary and relay

-dual flexlite fans

-4 core rad.

-egr delete

-oil overflow tank (2qt.)

-aem ems stand alone

-aem tru-glow boost guage/controller

-greddy turbo timer

-gm 5 bar map sensor

-75mm throttle body

-ported and polished intake

-3.5 inch exhaust (stainless)


also in my parts like im going to include wilwood 13.5 inch rotors and 6 piston up front and 4 in the rear i have hotchkis sway bars adjustable end links cncd unibody bushings welded rearend and shot peend and hardend axles, one peice drive shaft lmk what you guys think

 

[thedave925]

What about sleeving the cylinders to achieve a larger bore?

 

[89mkiii18]

where can i get this done? local machine shop or do they sell specific sleeves?

 

[Tun_x]

wow!!:1zhelp:

 

[89mkiii18]

lmao help?

 

[Slow_Sc3]

and dont forget one of those front facing intake manifolds and use 3 inch intercooler piping it will be easier to work with that turbo / front mount / throttle body.

 

[suprahero]

Why 1000 hp? Why not 2000?

1000 horsepower is a bit extreme if you plan on driving it any where but the track. You should really focus on a streetable 500-600 rwhp. If you're building a dyno queen or track car then I guess you can build it as high horsepowere'd as you'd like.

There are a few guys on here running around 700-850 rwhp on a 7m. You may want to check out their thread. Good luck.

 

[Slow66]

For the IC piping, 3" from turbo to IC, 4" from IC to tb, ditch the 75mm tb for a 90mm tb. Why are you going .040 over? Bore as little as possible to keep meat on the block. The head will need extensive modifications for those cams. You're gonna need some sort of turbo header, and a Front facing style manifold, and a wicked fuel system.....shoudl i keep going??

Not trying to be a dick, but you got alot more to think about, and i'm speaking from experience....

 

[89mkiii18]

understood this is why im asking i also own a 800 horse transam gta so i know what is like to go fast

 

[a_sesshoumaru]

oversized valves? i dont see them in the list and you will need some large injectors too!!! probably 1300cc or 1600cc

 

[89mkiii18]

yea i had the fuel system down with 3 walbros injectors (two additional ones bung welded into intake) and a controller for them as well and i have oversized valves in there

 

[Slow66]

I'm not implying you don't....Just take whatever # you have in your head that you think its going to cost to have a reliable 1000whp 7m. Then double it, and you might be in the ballpark of what its going to cost to build one, assuming you do everything yourself. Its really not all its cracked up to be....i kinda regret doing a bunch of expensive custom shit to eventually make over 1200hp on a 7m, I'd much rather have kept my 600hp one together and used this $$ for a house or something....

 

[Slow66]

You'll need at least 1200cc injectors, 1600 would be erring to the safe side, but may not be a bad idea....

3 walbros is a bad idea IMO, you shoudl go with a Weldon, with its controller, along with a sumped tank, -10 dual feed fuel rail, weldon reg, etc....

 

[AF1JZ]

7m with 1000 horse power but i need some help getting there i want a streetable car

Define streetable. 1000hp and streetable don't usually go hand to hand.

 

[a_sesshoumaru]

i guess a 1000rwhp car is not reliable for street use but it would be fun to try, go for it!!!!

 

[Idealsupra]

i dont want to sound like an asshole... BUT if you have to ask for a parts list for it... then youre better off just dropping it off at a shop and saying build me a 1k hp engine and paying them money when they ask for it.

 

[HENRY SIEMON]

what about ceramic coating on top of the pistons and valves , balancing the rotating mass ,, oil pressure,, tilton cluch or something strong,, you will go with underbuckets shins or one piece lifter like echo lifter ,, ???????????????:aigo::aigo::aigo:

 

[a_sesshoumaru]

hey and Dont forget the helpfull NOS jajajja

 

[selfinfliction]

hey i finally seen one of these threads!!! boostlee told me about them when i first came around last month :biglaugh:

 

[Dan_Gyoba]

I'd be somewhat worried about the crank/flywheel bolts at 1000 BHP, let alone 1000 rwhp. I'd be expecting that there'll be crank problems. Add at least a forged crank to the list, possibly custom (JZ flywheel?)