:nono: where the numbers at . Im just wannting to get an idea of how much hp are the na/t's makeing
1/2NA/T hp numbers???????????
- Thread starter 89supramk3
- Start date
Im hopping to be around, if not over 300 horses!
NA-T
GTE electonrics
SAFC
Wideband
BIC DDP
3.5 inch exhaust
Intake
Boost controller
Tial BOV
full intercooler and pipes
many, many other things!
All depends on the mods!
NA-T
GTE electonrics
SAFC
Wideband
BIC DDP
3.5 inch exhaust
Intake
Boost controller
Tial BOV
full intercooler and pipes
many, many other things!
All depends on the mods!
Fuzz420
Are U Here 2 take My Baby
I think na-t numbers are harder to find than n/a numbers,hopefully some na-t's come out of hiding and have some numbers to post up
i would expect alot more than 300 hp from 15 psi, i saw a dyno sheet on a na-t
on 6psi that was 263.
go to this site and follow the link to his photobucket site, there is a picture of his dyno sheet there
http://www.geocities.com/jt87na/na-t.html
on 6psi that was 263.
go to this site and follow the link to his photobucket site, there is a picture of his dyno sheet there
http://www.geocities.com/jt87na/na-t.html
15psi should be 300+. I would hope. 
I might have some NA-T numbers for you here soon with the new supra.
I might have some NA-T numbers for you here soon with the new supra.
OneJoeZee said:
Have you any link Joe? You tube? Streetfire?
EDIT- OK guys, go to google video and type in WFR Supra in the search. His video's come up!
http://video.google.com/videoplay?docid=5897065793950530021&q=WFR+supra
THeres one, and theres a few others!
Last edited:
Will at 15 psi you better be hitting a lot more the 300 rwhp bro! Im not too sure about the differences between the two but i know of locals dynoing at 350 rwhp and a shit load more torque at 15 psi...
Or be like me and cheat with buying a 60-1 and hit 400+ :biglaugh:
Or be like me and cheat with buying a 60-1 and hit 400+ :biglaugh:
CryoSlash said:
Id like to set my goals really low, and expect 300 horses, then when i dyno and have 350 ill be SUPER happy! :icon_bigg
I would be esctatic with 301 horses!
don't be ecstatic then, you're gonna make 299.s383mmber1 said:
Heh if anything i would watch the torque numbers, they are gonna be real nice
Can't wait to do mine. I'll be picking up a CT-26, HKS downpipe, and manifold at 2k7. I'll be running 10 psi, can't wait to see what that does.
-Matt
-Matt
Yeah, you should be able to make a lot more then 350rwhp @ 15psi. When I was N/A-T, @10psi I hit 341rwhp the only advantage that I had was that it was full standalone so I had more control of fuel and timing.
I was na/t and ran 15psi. The car was wicked im guessing aroung 350-400 hp. until the oil pump sucked and made a rod knock while running 7psi. Then i sent the rod through the block which destoyed everything. Its all fixed now with a gte motor , the horsepower difference is unbelieve. My na/t was a monster compared to this motor.
WOW! 300 hosepower is more than enough for me now......
If i could lay down 350 i think i very well may urinate myself.:icon_bigg
If i could lay down 350 i think i very well may urinate myself.:icon_bigg