Search results

anyone know where i can get set of stock 1jz cams??

i called jeff today, got a gasket set comming finally! its the last thing i need to get this thing running... hopefully nothing else goes wrong

Any one know where i can get a gasket set for the 1jz besides driftmotion? I have searched for hours and havn't found anything. Any help would be appreciated. thanks

yes i did change the oil... and ill do it again with some cheap oil, but how would it explain the smoke only under boost? would it be because the water is thining out the oil and causing it to leak through seals?

Well, pulled my valve covers and found water in my oil. After doing a cylinder leak down test and a coolant system pressure test we determined that my head gasket is not leaking? Hrmm... Any clue how water is getting into my oil if that is the case? About to push this POS off a cliff.

would the above suggest blown twins?

smoke smells like oil sometimes and kinda smells like smoke you get from seafoam... did compression test and 1 was 10 psi lower than the other 5, rechecked it 3 times and had same result

and another thing... when i got the motor the head appeared to be brand new, or it was just cleaner than the rest of the engine

ok thanks guys. ill do a compression test tomarrow... what numbers should i expect to see?

the smoke is white and depending on how hard i get on it, it is real thick white smoke. not sure on the smell ill ask my friend who was following me today...

i got my 1jz swap finished and took it out for a test drive today and when it gets into the slightest amount of boost it smokes like crazy? does this mean my turbos are gone? i really hope they arent cuz i dont have the money to go single...

Which pins are the VE and IDL?

how should i go about changing them? should i do it myself or take it somewhere like a tv repair shop

no the caps in my ecu have not been changed to my knowledge, and i checked plugs, crank sensor, and voltage coming out of igniter... im not sure how to check the coils, so that could be the problem. bad news is while doing a compression check last night one of the coils had an internal short and...

alright i installed my 1j and for starters this was my first engine swap. im having issues with it running. 1st its misfiring and i have checked almost everything there is to check for a misfire. 2nd it doesnt rev past 2200 rpm without braking up and almost stalling. i checked crank sensor and...