Search results

Changed and gapped. Checked for spark on all cylinders.

http://www.youtube.com/watch?v=yZLq8u2N3Hg Here is the high quality video.....help

fixed the wire and changed the plug wires but no change. How do I check my AFM?

Looks like one of the wires to the coils was pinched. Maybe i was getting spark but not strong spark.

Okay will take a close look at the wires to the coils. Thanks for the suggestion. i have fuel spark and compression. Maybe I'm not getting spark to all cylinders. ---------- Post added at 02:17 PM ---------- Previous post was at 02:15 PM ---------- will post a quality video.

Okay sorry I guess I miss understood you. How is this going to turn out, my car just not running? Hope not. I figure if everyone can run these beast setups, I should be able to get my car running bone stock. Maybe I'm wrong though, :-) ---------- Post added at 07:48 AM ---------- Previous...

That is connected. Rotating the cps helped but no start. Noid light shows injector harness fine. Plugs smell of fuel.

Noid lights? Never heard of them but sounds interesting. Gotta look into that. i'm going to have a buddy crank the motor while I use a stethoscope on the injectors. Hopefully this works. Want to drive my car real bad! Appreciate all the suggestions so far.

Just rechecked timing with the chopstick method and its spot on. Also checked for proper cps alignment according to the tsrm, it is also spot on. How do i find out if my injectors are firing?

ISC is hooked up. Yeah "burping". Yes checked spark.

Injectors are in the right order. Isc? Afm is fine. Csi is hooked up. Fp vsv and egr vsv hooked up. No codes.

Just finished gerring the car 100% back togerher and it won't start. Replaced the hg, arp head bolts, new vacuum lines with stock routing. I have fuel, spark, solid grounds (yes under the manifold), good battery, new battery connectors. I have also triple checked my timing.... no codes Here...

just in case anyone else comes across this, yes that was the correct part number. Cost me 18 bucks at the dealership. Thanks.

Nice! thanks.

Wondering what this connector on the right is for. Don't seem to have anything on my harness that connects to it. Thank you in advance. This is for a 91 auto turbo.

Thank you. I'll take off the throttle body and see if that'll give me some slack. I'm 2 inches too short to reach the starter solenoid.

Putting my car back together and am having a problem connecting all the harness connections. My question is, am i supposed to route the harness for the injectors from under the intake manifold or on top of the manifold. Everything is connected but the starter solenoid wire won't reach.....

Thank you!

Its a blue circular connector with 1 wire that connects into the water housing. I need to know if there is another Toyota car I can get this plug from since it went flying off my harness. I want to get a better condition one so I can solder it onto the current wire. Thanks in advance.

I have a 91 Supra Targa Auto. Just preparing to do the headgasket.