Search results

Been on a "drive for 2 weeks, fix shit for 2 weeks" pattern for like 6 months now..... Every second of being behind the wheel with it running makes it worth it.

Question hasn't been asked in a while.... Is there an estimated price yet? (gotta know how much I need to put away lol)

Went to change my manifold and 3 of the studs stripped out of the head. Will helicoiling work? Or is there a better fix? I'd rather not have an exhaust leak at the manifold.

Thank you. Yes it is a lightweight. Now I can buy it in peace lol

Well I would but I also thought that was a bad idea? To resurface a really thin replaceable disk? I'm just trying to see if my only option is to buy a new replacement, or if I can flip it first.

While Repairing my rear main I realized my flywheel surface disk is extremely heat warped. I know aasco sells the disk seperately for $119 bu I've also heard of ppl turning their flywheels, is this possible with the replacement disk?just flip It over?

I can't remember who it was but someone here made a hood that was exactly like stock, but the cowl was an inch or 2 bigger. That's been the best looking hood I've seen yet.

well I found where to bring the car to have it tuned, but I'm still wondering how to go about eliminating all the sensors and wiring the aem can replace?

As far as tuning shops go has anyone had good results with the shop mentioned on page1? (hrd) I've got some cams and springs I'd like put in along with an aem ems on the way and hrd looks like the closest place I've heard of on here. Anyone have good things to say about em?

to attempt to answer some of the vagueness in moys question, I believe this is being made for both reasons, ie: those exeeding the limits of the stock Mani, and those just wanting to clean up the engine and rid themself of the heatsoaking stock setup. As far as the other stuff I have no idea...

I think what he might have been wanting was answered when you said here is a 70mm TB available. He said he didn't male the power to go bigger and 70 is (basically) the same as stock. (atleast I think... My stock is 2.75" =69.xx cm) So if we go with the 70mm it's a really nice swap, same...

So here in he next month I plan to buy an aem for my 87 and I was wondering about how I should go about tuning it, I have no experience with standalones other than the little I've read on here. Does anyone here know a shop familiar with tuning 7ms in co? Or would it be ok with a tuner...

You should revisit dm and look for 7m 60-1 turbo kit ;)

i was told my rack was leaking as well....how much for a new rack or rebuild?

Ha I knew some heat soaking would be normal that close to the turbo I just didn't think it would be that much. right on then, good to know. Thanks.

so i drove my car from my friends house to my house yesterday (about 4 1/2 miles) and when i got home i wanted to look at my engine for the hell of it. just looking around i i decided to check my couplers and see if they were still good and tight and then i noticed my IC piping from my TB to the...

Well that's the port I was/am using. I changed the way the hose was setup and it now works amazingly. However I did readup a little on those 2 ports before I posted and saw in the tsrm that they only pull vac at anything other than idle so I held my throttle linkage open a bit and they still...

so i was looking for a better vac source for my bov and decided to try either of the 2 ports on top of the throttle body. took the car out for a test drive, nothing but surge. so i try the opposite one, again nothing but surge. so i let the car idle and remove both caps from the ports, and...

Haha I had really brought the car in because I wanted the techs opinion (rated the best in the four corner states and former owner of 3 mk3's) to see of I had missed anything. But I did feel embarrassed when I realized I had no idea about my suspension. All the time I've been fixing my supra...

So I recently felt my car was almost ready to finally have some real power mods added I took it to toyota to have a once over done by a tech and was told both my front lower ball joints were loose and needed replacement. My question is should the uppers be changed aswell? I've always thought...