Search results

Greetings! I was wondering if there is a database, weblink, book, etc... of part numbers for our cars. Basically, where are you guys sourcing your part numbers? Thanks!

One direction was 3.5 thousands Perpendicular to that was ~5 thousands Measurements were taken without an insert. Would the warpage decrease with the new insert installed? I've already checked Fidanza's website; but, found no info relating to this. Anyone know if I can run it?

I was thinking of diluting some Simple Green down to a 50/50 mix. What have you guys done that didn't ruin rubber parts? Thanks!

I whipped this up last night after I got my new Samsung Impression. It looks muuuuch better now! ;) It's 240x400 Enjoy!

After I pulled my powersteering pump off my parts washer tray, this was sitting there. I really doubt it came from inside the pump. It is however small enough that it could've come out of the tube that plumbs into the bottom of the PS Res. My guess is that this is something that has been...

This head has ~6k on it. I was surprised to see damage on 2,3, and 4 of the intake side. I'm pretty sure that my only option is to run it this way; but, is there anything I can do to help this or to prevent further damage? What do you guys think? I sure wish these heads were designed...

Good...bad...? http://cgi.ebay.com/ebaymotors/MK1-SHORT-THROW-SHIFTER-FITS-86-92-SUPRA-MK3-7MGTE-7MGE_W0QQcmdZViewItemQQhashZitem58851e65e6QQitemZ380190483942QQptZLHQ5fDefaultDomainQ5f100

Here is what I need: 33333A 33332 33335C 33428B Basically, I need all of the needle bearings except for 4th gear. I'm fairly certain that all of the part number's are correct; but, the document I'm looking at is a fax and has chicken scratch all over it. My local dealer quoted...

While inspecting the syncro's in the kit from Driftmotion, the syncros are different. I have three like the one on the bottom and two like the one on top. All of the syncros in the tranny currently are all the same and look like the one on the bottom. Any insight would be great! Thanks!

To all that I may have made mad... And to all that I may have made glad... Happy Thanksgiving Everyone! :)

I'm finally pulling the bottom end after my BHG. The BHG happened a little over a year ago. Here is a pic of two bottom halves (rod bearings): Here is a shot of the crank journal. Slight grooves; but, I can't feel them with my fingernail. I'm thinking it's time to have it...

BEFORE: AFTER:

I placed an online order with my debit card this past Friday. Today I got a call from a supposed Lubrication Specialists employee stating that their site had been hacked. He wanted me to confirm my CC information with him. Without giving out the requested information, I got the individual's...

Took this about a month ago.

I'm running the Maft Pro in Speed Density Mode. All connections have been checked so many times that I know them by heart! My IC setup is pretty standard. 2.5" Aluminum Pipe with a Driftmotion Spearco Replica. I am running electric fans and have them set to trigger just above the...

I just fixed my code 51 just the other day and now a code 52! When will the madness stop!?!?!?!?? ;) I'm not convinced I have a bad Knock Sensor. I have a suspicion that it's linked to my recent Speed Density Conversion. It's just a suspicion though... My check engine light came on...

Here's what I did today. I built and installed my laptop mount. It is on a Flex Arm that is bolted to the mounting rail under the passenger seat. When I don't want the laptop there, I simply remove it and bend the flex arm to lay flat on the floor. It's sturdy, completely adjustable, and...

So I got a code 51. The car hasn't been running quite right and today really started running bad. Bad enough to throw a code. Woo Hoo!! I checked for codes yesterday....nothing! Today after running like poop...51! About a month ago I checked the TPS per the TSRM and all was good. I...

Where: Kennewick, WA. Columbia Park at the Memorial Monument. When: Saturday, October 17th @ 10:00 am till 3-ish. Who: Anyone that wants to join us. Bring your Supra if you can! Plans: Meet, Greet, and, Showoff. Then around noon/noon 30, invade a local burger...

I'm coming back from the video store tonight when this SWEEEEEET Cuda pulls out in front of me. I could hear the rumble over my stereo. He turns right at the light and wouldn't you know that's the direction I was going.... ;) He eases out and stays in the right lane. I figure this thing...