Search results

Hey guys i am doing a clutch install next weekend and i need to know if there is a replacable seal on the tranny shaft i should be replacing. I already ordered a new rear main seal since there is oil all over the tranny, so i was wondering if the tranny has one too because i never checked to...

n/m i guess i answered my own question

i just got a couple pics from one of my friend's from last nights shoot i was telling you guys about in my other thread. i thought i would start a new one and let my other thread die out since the pics aren't that good. of course more pics are on their way :naughty:

ok so after alot of wrestling with the kit and making carfasion stuff fit i finally have the kit on... remind me to only buy shine auto next time.. lol (the shine sides went on perfect... the rest.. ehhh) Here is a teaser until the weather clears up so i can take some full shots some more...

Hey guys i plan on ordering a new clutch next week for my w58. I am NA-t. last time i was on the dyno i was puttin out 275ftlbs of torque, since then i went from stock boost to 13psi and a driftmotion IC, as well as maft. I am looking at south bend stage 3 clutches (holds 360 ftlbs)...

As most of you know i had a shitty experience with carfasion, for those of you with shineauto bomex kits, how is the quality? do the sides fit on perfect? Any raw pictures from when u got the kit so i can see the quality before u added ur own paint? I just want to make sure these sides are...

Me and a buddy of mine decided to take some quick shots since it was a very nice night today compared to the nasty weather we've been having. Please bare with me on my camera, i didn't have my nicer one with me tonight to take better shots.

edit: vids/pics of carnage later on in the thread My luck with carfasion, so far has been almost a complete waste of time and money. Ever since I saw the group buy for this kit I wanted to jump on the deal but didn’t have the funds. By the time I finally was able to dish out the money...

if you have bomex sides installed on your car could u please open your door and take a picture, i want to see how it looks sitting in the sill. thanks

I noticed that there were not to many reviews on the ebay shifter and the few that there were people bad mouthed it without ever owning one. Well i had the opportunity to buy one used on ebay for a good price and i just got around to installing it. Installation is about a 6/10, 10 being hard...

hey guys so i started adjusting my ebc and i noticed that i am hitting FC at around 14psi. I have it disabled on the maf translator but the car still has a fc. anyone know whats up with it? it could also be my ebc which is a profec b... i noticed that if i turn the adjustment just a tad i...

Hey guys i thought i'd show you my new manifold setup. I also tried to make it as clean as possible with the throttle assembly delete mod and i hid the coil backs under the intake manifold Before: After:

what does this go to? i am trying to fix my vaccum lines on my na-t (had the na manifold before) and i can't find out where this goes.

hey guys this weekend i'm pulling apart my engine bay so that i can clean it up a bit and i figure i would tackle this code 52 problem. I think the problem is a loose connection somewhere, so far this problem has happened with the orig wiring and the new rewire i did, usually what happens is...

Hey guys, i asked this over at supraforums and got no helpful responses so hopefully i can get some out of you guys. I want to know if i could use a cressida tb in place of my gte one since the cressida one is in much much better shape. I'm leaving the NA y pipes and going cressida style if ur...

Hey guys, i was going through my old pics and i found all these pics of my car from when i got it two years ago to now. I figured you guys would enjoy to see what my car has gone thru the past two years. I first found the car at a dealership in east orange with 28k orig miles, owned by 1...

hey guys i am getting code 52 again very often, i did the rewire a few months ago and it great for a month then i started getting the code every now and then. I did some more researching and i found some people are grounding the sheild wire and some say don't do it, i have mine grounded. now...

well i just got my new summer wheels in yesterday and i couldn't wait to mount them, so i quickly mounted one side and got some pics. Here they are what do you guys think? they are 18x10 and 18x8 both with a 35 offset. rear tire is a 275/35/18 and front is 245/40/18, i'm thinkin maybe a 5mm...

ok so heres where i'm going to start, my car used to be shimmed with 4 washers giving me 10-11psi, so i decided that i would not go so ghetto and bought a MBC. Everytime i adjusted the MBC i would either not boost enough or overboost wayyy way way over. i was turning this knob just barely...

hey guys my intermediate wipers stopped working. I can put them on setting 2 or 3 but on setting one the wiper will sometimes move once then never again.. they were working in the summer from what i can recall... any ideas?