Search results

So i'm not sure where to really put this thread, but i figured you guys would love to see this project. I am currently swapping in a 1uz to my buddy's 87 dodge ram. This was our parts getter truck (it's rust free!). The old 90 hp slant 6 just wasn't covering it anymore (i used this truck to...

So i recently swapped my 4.10 diff for a 3.73. Now my speedo is off. What are my options for a w58 trans? I would assume toyota doesnt have any other gear sets for the trans since it only came paired with a 4.10. Could i purchase a VDO speedometer or any other aftermarker speedometer...

Jason from SF asked if i could post this up. Basically we plan on having a cruise with different meet points ultimately ending at the Sonic in Holmdel for lunch. If we find that the turn out is very large, we may just end up eating at Menlow Mall. " HERES MY OUTLOOK FOR TOMORROW IM jnot...

Hey guys is there any good tuning shops that are good with maft pros? I dont have the time anymore to mess around with the car, i just want to pay someone and not worry about the tuning. lmk thanks

So maybe you guys can help me since there is only 1 other guy i know running a maftpro on his 1uz, but i'm having this weird issue that happens occasionally. In between shifts the car seems to lean out (off the a/f gauge) then dump gas back in. so basically inbetween shifts i have this bucking...

Before you do a quick reply please read. I'm curious to know which would be better, a single puller (14")doing about 2000cfm or two pusher fans (12") pushing 1500cfm each. I know that pusher fans are about 80% as efficient as pullers. Mechanical is not an option since i am 1uz TT (turbos...

So i'm trying to wire up my maft to my 1uz, and the only wire i was uncertian of was this one white wire that says is RPM signal in the maft manual. i'm supposed to connect it to the IGT wire on the 7m ecu, but since the 1uz has two ignitors i have a igt1 and igt2 so instead i connected it to...

so since my 1uz project needs some more room to breathe i plan on shoving a nice thick radiator where the condensor used to be. my question is who else here has cut out their stock radiator support and made a new one with square tubing. its a pretty easy task and fairly simple, but i'm curious...

i know this doesnt really pertain to the 7m, but i am in need of a custom rad and the way my 1uz runs is the in and the out for the coolant flow are both on the top of the motor. the radiator i want to get has the upper port on the pass side which is the input into the radiator, and the lower...

So its time to move on from my na-t and start another interesting project. This one will be a 1uz with twin ct-26. This all started with a friend suggestion of a 1uz and then with some research i have found that it has quite some potential. I'm particulary interested in it because its...

hey guys i'm looking for a exhuast header flange for a ct-26. where can i find them or would i have to custom make them? this is for a custom project.

so it has become that time when i need a new motor, or most likely need one. i blew my headgasket road racing and possibly screwed something else up since i found alot of oil coming out of my pcv. so what i'm thinking is: Option1: get a gte with rodknock free from a friend, do a stock...

Hey guys so my beefed up 130amp alternator died on me and i need a replacement by tomorrow since road racing is this weekend. Are there any other alternatives from other cars besides the mr2 that have an output of 100amps at least? btw advance and autzone cannot get me a mr2 one in time

hey guys my alternator just took a dump and advanced auto and autozone cant get me one by tomorrow. i have a road race to attend to on sat. please let me know if you got one!! my cell is 609 468 5512, my name is bryan. thanks my car is a 88, im not sure if the wiring is diff

so i hooked up my hid kit wrong and i blew the fuse for the fogs.. so i figured no big deal, ill put in a new fuse. i did this and they still wont turn on. any ideas? i do not have anything hooked into the high beams pin on my headlights if it matters

so i was at the junkyard today and managed to swipe up a set of mazda millenia projectors for $10. woohoo!. so immediately i got home and ripped out my h4 conversion housings and started on my retrofit. as of right now i have silicoln drying from the inside of the housings. tomorrow i will...

this thread isn't about if running efans is a good idea, i just want to know the best way to wire them right now i have a dodge stratus dual fan setup, there is 2 positive wires that come off of it. by suppling 12v to a single wire you get a low speed setting (both fans are on), if you supply...

i searched but i cant seem to find any info on it...

Pocono International Raceway HPDE Pocono East Course. Open to all groups and Instructors. May 2nd https://www.pdadrivingschool.com/registration.php If anyone is interested i'll be there with some people on this day. It's open to anyone, you just have to register. last time i...

hey guys does anyone know how much off my speedo woould be if i got a 3.7 rear diff? i have a w58 trans from my na-t. also those of you with a 3.7, what rpm do you cruise at, say 65mph