Search results

  1. IBoughtASupra

    Kotu's bye bye ct26 build

    Get some pictures up.
  2. IBoughtASupra

    Le Bella

    Cool. I wanted to know the numbers before I pulled mine down so I could have all the parts needed to go.
  3. IBoughtASupra

    88 Blue Turbo restoration/upgrade story

    I have done that before at the shop. Stopped wearing shorts too and now just the work pants, really helps to stay away from sharp edges scraping you. I have a pair of old Nike to wear around as I hate the heavy boots BUT I do wear them when I do an gearbox rebuild as those gears can really...
  4. IBoughtASupra

    ARP head studs vs ARP head bolt kits??

    Devin Leblanc, a user on here, ran a Fel-Pro on his 7M. He was pushing its limits with E-85 and an E-Manage. It was a street/drag car that made a few good passes. I sent him a PM directing him here if he would like to voice his opinion and results.
  5. IBoughtASupra

    Supra Vs Supra (7M vs 1JZ) RESULTS IN VIDEO Pg.21 Post #209

    We need a video! Did you dyno your 1J?
  6. IBoughtASupra

    88 Blue Turbo restoration/upgrade story

    Rare 7M cranks? I had two of those. Listed for over a month and nobody even attempted to buy them so I threw them out with a lot of other stuff.
  7. IBoughtASupra

    Le Bella

    The bearings in the diff, like the pinion bearing.
  8. IBoughtASupra

    First 7mgte Rebuild

    With that power, you'd need an EMS. A piggyback won't do at that power level.
  9. IBoughtASupra

    3P's TCCS Disassembly/Analysis

    Wow.....I applaud your work on many levels man.
  10. IBoughtASupra

    Supra Vs Supra (7M vs 1JZ) RESULTS IN VIDEO Pg.21 Post #209

    Hurry and race the car before another JZ owner giggles the CPS wires!
  11. IBoughtASupra

    2jzge flywheel cheap?

    You will have to see how the holes line up to the crank and if it will fit on the crank as well. If the hole is smaller, you could open it but if the center is larger, no luck there as a centering ring does not make sense to me.. :(
  12. IBoughtASupra

    Le Bella

    How was the diff rebuild? I want to rebuild mine using the Wier kit as well because it has a very slight whine, barely noticeable but I still want to do it. Do you have the bearing numbers? I am sure they all use the same bearings even though the ratio varied throughout the years and...
  13. IBoughtASupra

    Improving Factory Brakes

    Vented means openings between both sides of the rotor, correct? If so, yes, they are vented. Here is a picture.
  14. IBoughtASupra

    Improving Factory Brakes

    I don't get what the face palm is for. I am asking a question. If people upgrade the pads and it improves braking on the stock rotor, why wouldn't the Brembo Evo 9 rear calipers using EBC Pads with the STI larger rear rotor NOT be an improvement?
  15. IBoughtASupra

    Improving Factory Brakes

    So Ian would you think the EBC pads with Brembo rear calipers and STI rotor retrofit would be even better than just using the EBC pads alone?
  16. IBoughtASupra

    How high can you safely boost a mostly stock 7mgte? New to forums!.

    Would I be able to use the oem mk4 TT supra injectors? No, they are side feed and the 7M rail is top feed. I can make a custom rail to use side feed injectors but it is a waste of time. Get a set of top feed 550CC injectors. I was also lookin to get a walbro fuel pump or could the...
  17. IBoughtASupra

    Driftmotion turbo kit

    You will have to clock the turbo away from the number one runner. If you can have someone modify it, it would help you clock the turbo downward and have a much neater intercooler piping setup.
  18. IBoughtASupra

    Supra Vs Supra (7M vs 1JZ) RESULTS IN VIDEO Pg.21 Post #209

    The connector I have is brittle and it's falling apart. :(
  19. IBoughtASupra

    First 7mgte Rebuild

    Ofcourse. Long drives are nice, allows you to see places. I suggest you list all the parts you need to get, use my list on the first page as a reference but not limited to that. I assume you would want him to assemble the motor and you can bolt on all the accessories and electronics. I...