Search results

  1. becauseican

    Project Cherry Widebody, finished! (New pics on post #451 and #511)

    295's might fit stock, but he is running a -10mm offset in the rear!!!, they stock out from the stock fenders about 2.5"!!! Anyways I am really stoked to be working on a sick project like this.......There is a TON of body work to do on it, I hope to have it done by March-April. We will be...
  2. becauseican

    Which brake bands do you guys recommend?

    KVR and Hawk are also very good, I have tried both. DO NOT get the Raybestos oem replacements, they are junk!!
  3. becauseican

    Any one here using a 2jz with a 1jz ecu

    Heres what I am thinking. I currently have a 1jz with a Mines ecu/ emanage and 680cc injectors. Now if I swap in a 2jz motor and run it with just the Mines ecu. I figure with the extra displacement, it would run lean, but by using the larger 680cc injectors it should be close to even itself out...
  4. becauseican

    Dyno data?? DDP reroute vs. Std. 3" DP

    I have not had a chance to dyno test the rerouted ddp yet, but I dont think that there will be a big difference in power. By reintroducing the wastegate exhaust farther down the down pipe and at a 45 degree angle is definatly more benifical than even a wide mouth style downpipe. Its the...
  5. becauseican

    Any one here using a 2jz with a 1jz ecu

    I am wondering if anyone here has tried this sucessfully? Please disscuss........
  6. becauseican

    Guaging interest, twin GT28R turbo kit, PICS!!

    OK people, I have this kit from my car for sale now. I can also build just the manifolds for anyone thats interested. I made 502 whp with this set up at 22psi. Should be capable for 550 whp. there is about 6000 miles on this setup. Its a fully bolt on kit, you will only need to modify the...
  7. becauseican

    1jz/2jz pics

    My 1jz, with the BIC twin gt28r kit, which is for sale BTW.
  8. becauseican

    To DDP or Not to DDP?

    The small wastegate hole can only flow so much exhaust. The stock wastegate was designed to flow enough to control stock boost levels and with stock exhaust, and restrictive downpipe. Now once you use high flow parts like downpipes and exhaust there is way less back pressure and there is just...
  9. becauseican

    1JZ places for tech/swap and parts

    BIC Pre 89 motor mount adapter brackets, allow the use of the older square motor mounts with out having to swap crossmembers. BIC 3" 1jz downpipe, bolt on 3" downpipe, works with the stock cast Y pipe. www.bicperformance.com
  10. becauseican

    Spec II

    Its a little trickey to set up, you need to play with it for a while to get it right. With a stock type setup you will probably just need one setting , and then you can turn it off for the low setting. I think that the SET GAIN is in psi, but the SET is a % of duty cycle. I would start with the...
  11. becauseican

    Brake pad recommendations

    Here is what i have used on the Supra: - Raybestos oem replacements, they are junk as soon as you get any heat into them the pedal goes spongy and fades like crazy. Turbo drifter here had them on his car too and once after a hard run he hit the brakes and not much happend, he ended up jumping...
  12. becauseican

    intalled custom fuel rail and dual walbros

    Now did you insulate the two pumps?, I heard that you should put some foam or magnetic shielding around the pumps when running them close togeather?
  13. becauseican

    intalled custom fuel rail and dual walbros

    Do you have any pics of the twin in tank pumps?, I will be doing the same this winter.
  14. becauseican

    Guaging interest...Who wants my twin GT28R turbo kit?

    I still have it, the is a few people interested in it right now. It will go up on ebay in about a month or so if nobody picks it up here.
  15. becauseican

    To DDP or Not to DDP?

    Either downpipe will get you big power gains over stock, esspecially when used with a 3" or 3.5" catback. The standard BIC 3" downpipe with the integrated elbow will still give you big gains over stock, the DDP will just give you more. I dyno tested both and found a 28 whp and 18tq gain just by...
  16. becauseican

    Why did YOU go 1JZ?

    It was very simple for me, after 2 BHG's on my 7M in two years, I said screw it and found a 1jz clip for a good price, and the rest is history.
  17. becauseican

    D2 coilovers

    If the D2 coilovers are the same as K sport coild overs which is very likely scince there is very few avctual manufactures out there . I would say to stay away from them. Heres the story: My brother bought the K-sport coilovers for his S13. First off there is nothing for installation...
  18. becauseican

    Need to Clear up a DDP Issue **PLEASE PLEASE READ**

    Karaki / George, I cant believe what a gong show this is turning out to be. I am sorry that you got dragged into this. Someone made a mistake, and jumped the gun on accusing you. You are not the one that copied the said part. I really respect your way of doing business, you design and test and...
  19. becauseican

    How Many People have more than 1 Supra at your house

    Vansupra owns all of you guys, at one point this summer he had 9 mk3's, i think he still has at least 7 !!!!! Me I only have one mk3, one 92 Toyota 4x4 and a CBR 600.