I took the EFI 101 course a few months ago in Seattle, it was a great learning experience. It is more geared towards standalone ecu tuning and how to set it up. It was a two day course, with the first day in the class room doing theory, where you learn how and what each engine sensor operates...
BIC performance now offers another version of the JZ engine swap brackets. These are for 89+ mk3's with the round style motor mounts. These will work for 1JZ's or 2JZ's. No more need to spend weeks and weeks looking for oem jza70 brackets, which are hard to find, scince most 1JZ's are from...
I use the 6097's, they are dirt cheap. But I also have a miss at higher boost 17+, but I know the jz coild are notorious for not having enough juice. I am gapped at .025.
I had a similar problem when i did mine, so I ended up getting a filter from a 300zx twin turbo, and use a big hose clamp onto the bracket. The 300zx fliter uses a slip on hose for the inlet and outlet. I then got some fuel injection rubber hose, and ran it to the pump side abouyt 6-8" long and...
I had the CC Iron Man clutch, and it was great.........until it welded itself to my flywheel after a some donuts afetr about 4000 kms. I managed to crank the starter and it "unwelded", and drove it for another month. After I pulled it apart and took out the clutch, it was a mess, the flywheel...
The BIC test pipes are exactly the same length as the stock cat, 11 3/8" long. The JDM JZA70 cat backs are about 1" shorter than the 7m exhausts, which is why i make a 1" longer testpipe for the JZA70 cars. 3" sounds like allot, it would be hard to say whats going on without pics, it sounds like...
Well I have a rhd jza70 in the shop now that has a few issues, anyways I cant get any type of CEL code to show up, even if I unplug the TPS or MAP sensor. Has any of you experienced this before?. The car is stock exept 3" dp, exhaust, intake and SAFC and a Blitz ECU and a BCC and speed cut...
The 2jz or Soarer brackets will not work on a mk3. The only brackets that will bolt up are the JZA70 brackets or the BIC pre 89 brackets ( if you have a pre 89). BUT!!!!!!!, BIC performance now makes jza70 style brackets for 89+ mk3's. The price is $185 shipped and you will see them in 2 weeks...
BIC Performance now offers a 3.5" catback exhaust that compliments the DDP very nice, and will flow for an unrestricted 650+ hp. There is some video clips in the BIC vendor section. I also offer a full package deal, if you purchase a downpipe and a catback, I will throw in a FREE 3" testpipe. PM...
I was thinking about this the other day too, scince mine is maxing out at 1.16 bar, I have a Mines ecu so there is no boost cut. But the Toyota MAP sensor reads x-volts for x-boost, now if you change the MAP sensor with different calibration, it will read more or less volts for the same amount...
Well yesterday on the way home from work, I was following a new Mustang GT with a racing stripe and some funky exhaust that came out right behind his rear tires. Well at every light he was revving and took off fast. We finally get to a light where it splits into two lanes and he is still in...
I did have a widebody GA70 at my shop a few weeks ago, I thought that it was odd that it didnt have a narrow body. Also I have seen alot of JDM imports that are GA70 narrow bodys, and have a 1jz and Recaro interior swapped into it, so keep an eye out for those, and make sure you get what you...
My two guage pod fits ok, the top edge is close to the side window, it could use a trim of about 1/8". One thing I dont like is how close the pod is to your hands/ knuckles on the steering wheel, I have like 1-1.5" clearence from my hands to the pod. I have smashed my knuckles a few times on the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.