Search results

  1. OneJArpus

    1JZ will not drop in- please help

    as your dropping it in put a jack under the transmission and jack it up it should slide into place. When i dropped in my 1JZ and 1.5JZ i did not have to hit the firewall at all. Yes it was a tight fit but it goes in
  2. OneJArpus

    Collector Car Insurance

    Yes i could do this but why go through the hassle and mess with the mileage For the average MKIII yes i can see your point. But with as much as i've put into the car restoring and upgrading and my future plans. Full coverage is the only choice. If i go put regular and it gets broken into...
  3. OneJArpus

    GM 3bar Map Sensor Question

    i have a SAFC 1 so i dont know how many tuning blocks
  4. OneJArpus

    driftmotion 60-1 or to4z turbo kit?

    get bigger injectors, so you have room to work with when you want a little more power and you don't have to buy the same thing twice
  5. OneJArpus

    Installing new calipers, pads, and rotors

    i AGREE, i did the same thing, new calipers w/brackets, brembo rotors, stock pads, ss lines on my build. When it was time to hit the road. The master cyl seal went LOL
  6. OneJArpus

    Collector Car Insurance

    Well, 5,000 miles a yr isn't bad if you don't daily your car. So if you do 1. its not a collectable in their eyes as you daily it. You must have 1 other car used as a daily to "fit' their terms. I've only driven my supra 3K in 4 years! So yea 5K a yr isn't bad when its not broken or being...
  7. OneJArpus

    1jz single breaking up under boost :(

    What year 300m coils? Do they use the same clips as the 1j/2j? do they use the 1j/2j ignitor or do they have built in ignitors
  8. OneJArpus

    1jz vacuum pressure at idle

    Check for boost leaks/vac leaks. Build a boost leak tester
  9. OneJArpus

    Collector Car Insurance

    I am posting this and explaining my experience with surfing around for the best price in cost and best coverage I can get and afford at the time. I found http://www.americancollectors.com/ this page through google. I did an online quote and wasn't sure what value i should put. So i did 18000...
  10. OneJArpus

    Is it even worth fixing?

    i have a mint 88 harness turbo 5sp. Purchased it new from toyota 2 yrs ago. haven't driven my car much and i'm parting it out. Its mint, no brittle wires or broken clips. Let me know if you want it.
  11. OneJArpus

    redma70's full motor swap

    wow that fucking blows dude, gl with what ever you do.
  12. OneJArpus

    Need help identifying a plug on a 1JZ harness going into a MKIII

    EA2 connector - You splice that into the C1 connector located on D/S engine bay fender area. 1989 as indicated on 1jz.com Connector ID's http://1jz.com/tech/docs/wiring/ConnectorIDs.pdf
  13. OneJArpus

    I'm the new girl here

    y not just swap cars vs swaping motors? LOL
  14. OneJArpus

    How do you remove your head unit?

    Remove astray and unscrew the two screws in there holding the bezel in place Remove shifter then unscrew the screw on the driver side near the end of the bezel Pull gently to remove the tabs that hold the bezel in place. Disconnect the plugs for Hazard switch and Lighter - Do not forget to plug...
  15. OneJArpus

    GM 3bar Map Sensor Question

    im gonna give it a try but i'm still not sure how i'm going to tune the map sensor with the SAFC. I thought i was just pulling and adding fuel with the safc
  16. OneJArpus

    HELP! The boom on my engine hoist bent

    i always got my harbor freight hoists for 99 bux... no major issues other then the boom on the hoist being short
  17. OneJArpus

    88 Supra - Project 1J

    yea we do!! its been a very long time since i've been to a supra meet.
  18. OneJArpus

    R154 Rebuild

    Why not use MC? Pricing too high?
  19. OneJArpus

    Where To Get A New 7MGTE???

    i have a full 7mgte engine from an 88, needs to be rebuild i could sell for a decent price. PM me if interested