Search results

  1. Justin

    ABS in my 03 Camry

    Well, I didn't run any tests or anything, but I visually inspected them, and they looked just fine.
  2. Justin

    ABS in my 03 Camry

    Fuses (fusible link) is good. Didn't think about checking brake fluid... i'll do that in a bit. Brake fluid is good
  3. Justin

    ABS in my 03 Camry

    I got stuck on my way home from class today. I got myself unstuck by rocking back and forth, and a shovel. About half way through rocking back and forth I noticed my ABS and 'Brake' like came on. I pulled my car into works bay, jacked it up and visually checked all my lines, and plugs...
  4. Justin

    Mouse/Keyboard Combo

    I am wanting to get a new mouse/keyboard combo and came across this one http://www.logitech.com/index.cfm/keyboards/keyboard_mice_combos/devices/3481&cl=us,en?src=ces-2008&lnk=cd-mx500-rev_learnmore the only downside i see to it, is the fact it uses bluetooth, instead of the standard...
  5. Justin

    Q45 and Code 51

    Has anyone with a Q45 TB encountered a Code 51 after install? I followed the common wire guide, everything soldered and taped, and I am currently getting a code 51. ( I have no AC, and a 5Spd, so the other options don't apply) I was just wondering if anyone had a quick place to look...
  6. Justin

    .zip passwords

    meh, this is actually legit. I found a disc with a lot of pictures/programs/music etc from way back in the day that I password protected, and I cannot remember for the life of me what the fuck the password is. I'm talkin like 10 years ago :)
  7. Justin

    .zip passwords

    anyone have a program that will 'get around' or even better, give me the unknown password?
  8. Justin

    Finally Finished... Gauge Cluster

    I had to dremel the shit out of the stock cluster, I didn't have to cut holes in the back, but I did in the bottom. There's not tons of room, I really had to work that area for the vents to sit like stock, by the boost gauge. the bottom few mm is covered on the boost gauge too. I'll get...
  9. Justin

    Finally Finished... Gauge Cluster

    I wish I had gotten the Link series, instead of the BF series, but I just read the discontinued them! WTF! I don't like the whole tinted backlighting thing. Hard to read in the sunlight. They're just the normal BF White, Imperial series. I've had 'em for a year now. Its just a...
  10. Justin

    Finally Finished... Gauge Cluster

    Thanks for all the compliments guys. I can do your c.c. if you'd like white or blue. I'd have to order any other color and it takes a while... PM me for prices etc. I'm really excited I got this finished, its been something I've wanted to do for a while now. Now I don't have...
  11. Justin

    Instrument Cluster - What aftermarket gauges fit? What LEDs are you using?

    check my thread I just made in the general section... I just did exactly what you're talkin 'bout with my Defi's. Autometer makes a programable gauge that works with your fuel level sending unit :)
  12. Justin

    Finally Finished... Gauge Cluster

    I started this project about a year or so ago. I had some free time tonight so I finished it up! Wooooo. They sit in there perfect. Turned out exactly how I wanted ( that's a rare occurance :))
  13. Justin

    Jig Saw?

    hah, the last shop I worked at used a 'shop use' DeWalt. I really didn't care for that one much, I had to replace the trigger a few times. The guy who recommended the Porter Cable is probably one of the best installers (12v Custom) in Wa state, so I really am taking his advice to heart :)...
  14. Justin

    Good 3 inch exhausts...

    if you want to get on AIM or something message me, I'll send you a clip of my Tanabe. Its over 100 MBs though, else I'd just post/host it
  15. Justin

    Good 3 inch exhausts...

    I'm absolutely in love with my Tanabe. Very very quite. its excellent.
  16. Justin

    Jig Saw?

    I have worked with two great installers who have been doing installation for years and years each... One recommends a Makita jig saw, says its the best one out there, the other says Makita sucks ass, and would trust only the Porter Cable. does anyone on here have any input to add? I...
  17. Justin

    Boost Controller Solenoid setup...

    Yeah, but if they don't work I have to go to the store and buy new hose, cuz one will be too short ;) Such a pain in the ass, I KNOW! Thanks :)
  18. Justin

    Boost Controller Solenoid setup...

    I'm finally getting around to installing the boost solenoid for the maft pro. Even though its about 23 degrees outside. :( I lost the paper that came with the solenoid, so I just wanted to make sure I am hooking it up correctly before I cut my lines :) IN : Compressor OUT ...
  19. Justin

    New winshield washer squirters FTW

    Cheaper than 23 dollars??????