Search results

I am referring to the 9th and 10th pics. There seems to be a dent on the bore. Is this dent on the head? If it is, it looks like the piston couuld have hit it. I have seen a N/A with a very bad rod knock where the the rod punched a hole through the block just below the oil filter location...

You could use a bigger helicoil with a bigger sized thread on the outside but 7/16 thread on the inside. That way you could use the same studs. A good way to make sure you drill and tap the holes in straight is to make a block that you could temporarily bolt onto the side of the head. On...

More pics guys... Cheers, Roy

True...but you can get a 2j manifold for $200 shipped... If you know a friend who could do the welding, then you good to go..except for the throttle body and cable relocation. You could easily make a adaptor for your alternator. And mkiv supras have put over 600 hp using the stock manifold...

Im doing that... Just waiting for my 2jzte manifold to come in and I will adapt the lower runner to fit the 7m head. You could use a FORD throttle body and adapt it to the manifold... http://www.supramania.com/forums/showthread.php?t=28866 I will have to buy a intercooler that has...

Anyone used any one of these radiators? http://cgi.ebay.com/ebaymotors/Haste-86-92-Toyota-Supra-JZA70-Manual-Aluminum-Radiator_W0QQcmdZViewItemQQcategoryZ33602QQitemZ180101243707QQrdZ1 Or...

14hp??? Cant be right.... My Honda NSR250 puts out 60hp. With bigger jets for the carbs, better air filter or run open box,exhaust, ecu race tune with other things done would put out over 80-120 hp and the bike weighed like 200 lbs. Other guys have made it alot faster. The power to...

Ronnie sent me these pics to post for you guys. His comments : 1. The steel inner sleeve is not shown,but will be included in the subframe kit. 2.The bushing is divided into 2 halves, The half with the flat top sits between body and subframe and the half with the concave top is...

I was going to do that...I weighed all my pistons, rods, bearings, rings.... I wanted to weigh every component on the car to help find ways to drop the weight. But my electronic grams scale goes upto to 5lbs. I usually do that at work with all our components to help produce the lightest...

There's some guy (cnewingham) on here from southern california selling gaskets sets. Some guys have bought from him and can vouch for him. Here is his link in the FS section. http://www.supramania.com/forums/showthread.php?t=40046 I bought a brand new oil pump from ebay. The pump was...

I wouldnt call that a great way to start... Yo can rebuild one for alot cheaper....look in the FS sections on here or SFs. Cheers, Roy

You and those shops must have been doing things wrong. The supra is very sensitive so that means it needs people who pay attention to little detail...no short cuts. Probably what you should have done is educated yourself on the 7m first before throwing money around trying to fix it. If you...

Its a thermal coating like the stock genuine toyota pistons. Cheers, Roy

I heard the same about copper head gaskets too. Cheers, Roy

And let the honda ricers have a field day?....Now why would Duane wanna do that? Cheers, Roy

I have the exact same problem with my one. I havent sorted it out because I am busy rebuilding my engine. Cheers, Roy

:icon_evil Healthy good competition did no one wrong...Bring it on 1jz. Cheers, Roy

Feel proud man...You are a supra guy and lots of people respect the supra... As for Hondas..just known for good gas mileage cars. Cheers, Roy

Really cool vid Duane... All those who doubt the capabilities of 7m should watch this and this will shut their mouths.Its a good motivation tool for us 7m lovers. Cheers, Roy

Ask on here or Supra forums...if there are people close to you...I'm sure there are people from your state. Cheers, Roy