Search results

  1. OneJArpus

    changing my head light to non flips ..i got a few questions if possable

    Agree'd i'm running their Mini DS2's 6K HID Kit & Bi Xenon Harness on my retro
  2. OneJArpus

    What kind of sway bar?

    Yea, Chevy/Toyota did their thing back in the day
  3. OneJArpus

    How do I get this hydrofan bolt off?

    Yea i was suprised when i put the SS line from driftmotion how much i had to tighten it so it wouldn't le
  4. OneJArpus

    How do I get this hydrofan bolt off?

    Yea when taking bolts off i dont like to sit there trying to crank it off and brake it, one snap motion to jolt it enough to looseing it and that works 99% of the time
  5. OneJArpus

    Your 1JZ-GTE And 2JZ-GTE Swap Guide For Dummies Discussion Thread!

    Either or will work fine. I say stay with what you have
  6. OneJArpus

    3270 lbs street car

    With a full tank it'll be over 3500+ easy. Fuel weighs alot.
  7. OneJArpus

    The infamous 1jz breakup: tried alot, getting no where

    try to solve the codes first then proceed to solve the sputtering/breakup 14, 24, 31, 42 14: Ignition Signal ( Check the IGF wires on the igniter ) Diagnosis No "IGF" signal to ECU "A" times in succession. A = 6-8 (7M-GE) A= 3 (7M-GTE) Trouble Area Igniter and ignition coil...
  8. OneJArpus

    How do I get this hydrofan bolt off?

    17 or 19mm 1/2" ratchet extention and instead of cranking on it and turning to try and loosen it. Position it so you can give it one big jolt (inertia) to loosen it.
  9. OneJArpus

    ht da apx supra mkiii owner

    I'm not a fan of drift style although i do like the looks of certain cars... But those are just opinions. If the owner liked the look enough to do it just leave it be. He could say the same about my car your car or anyone's car that he doesn't like the look of it. Its just a matter of opinion...
  10. OneJArpus

    Went to the dyno today and got horrible results - AEM V2 PNP 1JZ

    What do you i have to do to the AEM box or Software to run seq. injection & ignition with FIC850 CC inj & 1ZZ Coils? Also does anyone have the info for the coils
  11. OneJArpus

    Your 1JZ-GTE And 2JZ-GTE Swap Guide For Dummies Discussion Thread!

    There are two production date changes for the tundra, i will try both out and see what happens and provide a part # for the correct fan clutch. ET of completion 1-4 weeks if i can get a loaner shroud.
  12. OneJArpus

    Your 1JZ-GTE And 2JZ-GTE Swap Guide For Dummies Discussion Thread!

    Once i get back to work, i'm going to try and see if i can get a clutch, i already have the blade, anyone in NJ want to loan me a shroud?
  13. OneJArpus

    Your 1JZ-GTE And 2JZ-GTE Swap Guide For Dummies Discussion Thread!

    I just read on the other forumm that 02-04 TUNDRA v8 clutch w/7M Blade will work AND it works with the shroud! (Koyo Radiator) Found from other forum
  14. OneJArpus

    Went to the dyno today and got horrible results - AEM V2 PNP 1JZ

    ok, did some snooping around the aem today. I checked timing and it looked like it matched up. I had a timing light, it was a bit difficult with the ATi damper because the marks are on the outside. I recalibrated the TPS and its weird with my foot completely off the throttle it marks the...
  15. OneJArpus

    off to the dyno today

    i predict 295-300 with 370s
  16. OneJArpus

    Water proofing a Cold Air Intake

    Cold air intake? Spend the extra thought on a way to cool the air AFTER it goes through the intercooler. No matter how cold it is before it gets to the turbo its going to heat up and FAST.... finding a good way to lower the temps after is more important. Good intercooler with a good core /...
  17. OneJArpus

    Why do most of the MKIII owners not buy hood struts?

    I don't know all i know is i've replaced both hood and hatch struts its a few bucks and i dont need to effin stick in my car to keep the hood open. I need that room for tools when the shit breaks down LOL..
  18. OneJArpus

    1jz Hydro pump or not?

    I would of kept mine if you could of found that part # when you got your new pump LOL But that was years ago and no long had interest in looking for it