Search results

Well over the winter/ spring I swaped out my damaged 1jz and picked up another Soarer 1jz and dropped it in. I also went sinlge while I was at it. I went to the dyno and with a over rich tune it made 368 rwhp at 15 psi, and at 18 psi it made 418 rwhp on 94 octane pump gas. The dyno didnt have...

After the my engine replacement, there is one hose I cant figure out. Its the small hose coming off the bottom of the TB with the blue check valve. Now I have eliminated the metal pipes that are attached to the intake mani, and rerpouted them. I have searched the vaccume hose routing pic on...

Well, I finally got my car running again with a new engine......I think the bad CPS wiring at the plug caused the detonation death of the last engine, the last 1/8" of wires were bare and frayed, most likely touching each other at the plug. So I found another plug and wired it in. Now I have...

Well I finally have gotten around to post the pics of my old engine, I had some slight detonation to say the least, 5 out of 6 pistons looked like this, and tthe head was hammered just as bad. Also check out the headgasket, it has been blown out too. Look how cute the rods are, the are so short...

I just got my turbo from SP yesterday, I ordered a DBB pt61 with a P trim wheel and .58 turbine housing (its going on a 1JZ). Anyways I took it out of the box and noticed the turbine wheel was allot smaller than the last turbo I had with a P trim turbine. The measurements of mine are 56.20mm...

Does anyone have any experience with the ACT Extreme PP?, I have searched but havent found much info on it. I am currently running the ACT HD PP and its great, but I think I need something to hold more power but I dont really want to go with RPS max due to crank walk issues. What is the...

Is he still around here?, I need to contact him but his email that I have doesnt work anymore. PM me if you can give me his new email. Randy

Well I have a 1jz on an engine stand and my impact gun isnt getting the crank bolt off. I tried to put two bolts in the flywheel bolt holes , and wedge a prybar between them , but I sheared a bolt off :(. Any ideas? Randy

Vancouver area: I am ordering some body parts from ShineAuto, and wondering if anyone else is ordering anything soon?, as shipping is allot for cross border stuff due to the huge boxes needed so we could split shipping and possibly get a better deal while buying a few parts at once. They have...

I have had a lot of emails and pms about these, so I now have a group buy going. The GB is for solid Nylon subframe spacers, there is 6 spacers per set that go between the rear subframe and the chassis. These really tighten up the rear end and do wonders to help with wheel hop. Click on the link...

Like the title says, I need a right side rear knuckle/ spindle with hub for the rear suspension for a mk3. I don t need the control arms or axle. Let me know if you have anything?. Randy (778) 772-8459

I think this would be a great stickey. If amyone has some compressor maps that they have plotted, post them up. This way we can stop the endless" is this turbo any good" posts. Randy

I am wondering if anyone here has tried this sucessfully? Please disscuss........

After months of waiting the BIC 3.5" Thunder cat back is now on available!! see the thread in the BIC section below: http://www.supramania.com/forums/showthread.php?t=27026

I have had many requests for this part, so now, just released is the BIC 3" 1jz downpipe. Click on the link in the BIC section for more info: http://www.supramania.com/forums/showthread.php?t=27021

Well I finally have got around to posting some pics of my new wheels and the Night Pager BBK that I installed. Firts about the brakes. I used some original Night Pager brakets, with 350Z track pack slotted Brembo rotors ( 13.1" x about 1.25" thick), 300zx aluminum 4 piston calipers with Hawk...

Well I am testing the waters to see if anyone is SERIOUSLY interested in purchasing my hand built twin turbo kit. I have had a bunch of interested people over the last year asking about the kit or manifolds. I have decided to go a different route with the car. With stock cams it makes 10psi at...

Does anyone have one, online or a book?. If someone does it would be a great thing to have online, I could host it on my website. It would be a great rescource for us all.

I am officially releasing the BIC adjustable endlinks for the mk3, see the post in my vendor section. http://www.supramania.com/forums/showthread.php?t=11525

Here is a vid of me at the local drift competion. The donuts are over a minuite long, and I killed one set of tires doing it. Enjoy!! http://www.bicperformance.com/video.htm