Search results

So I just replaced my head gasket on my 91 cressida. I have replaced many head gaskets on 7ms so please rule out stupidity on this. I replaced the stock head bolts with arp head studs, had my head cleaned and checked for warpage and it was within spec according to the tcrm. i cleaned the gasket...

So I'm going to be bolting on all my turbo parts I have onto my GE block. The only thing I'm confused about is how to run my oil return line. From what I've read people tap into the oil pan which is obvious but what do you do with the stock oil feed and return lines? Can you put new fitting in...

When I first got my 87 Supra Turbo all the lights worked in the interior. Then I messed around trying to wire something up and I must have messed something up. Since then the key cylinder light, driverside footwell area light, and the fog lights haven't worked. So I was wondering what is wrong...

I put in a 6 puck disc in my stock clutch and it's alot harder to start moving than it was with the stock disc. It likes to jerk. Is this normal with having a 6 puck in there? Also I just installed a brand new slave cylinder Beck Arnley I put about 50 miles on it and the boot ripped and my push...

I just rebuilt my 7M-GTE and got it in and running again. Timing is set at 10 deg. but when I turn it off it diesels out. The cams are in the right position so is the crank so don't bother throwing that out there. Is there an extra step to adjusting timing with the CPS other than just turning it...

I took my ABS out because it didn't work and didn't feel like having it fixed and I just don't want it. My question is, are the non ABS and ABS proportioning valves the same, and if not can I still make the one I have work?

I bought my car about a month ago and when I got it it ran fine. Then a couple days after I bought it, if I hit the gas to try to rev it a little it wouldn't rev freely like it should. It would rev really hard, like you could hold the gas part way down and it would seem like it was fighting just...

When I got the car they worked and then I was going to hook up some leds under the dash and I was using a voltmeter to find a place that had power with the headlights on and I think I ended up crossing a power with ground and blew a fuse or relay. The thing is I don't think theres a fuse for it...

I have an 87 Supra Turbo, I put on an 89 front bumper and the 89 fog lights and I know the bulbs work because i hooked them straight to the battery and they turn on but they don't turn on when i have the headlights on and the switch on. I have power at the switch, and at the fuse panel, but at...

I put on some 89 fog lights on to my 87 and now when I go to turn them on they don't turn on but my headlights brighten up instead. Has this happened to anyone else or do you know why it would do that?

Ok, so I have my 87 Turbo with TEMS. The thing is that it doesn't work, the lights on the gauge cluster don't light up either. Before I stripped out the interior and swapped stuff from my parts car I could press the Sport button and here the actuator motors moving, but after I swapped it doesn't...

I was just wondering if it's totally neccesary to have a AFPR if you do the Lexus AFM 550 upgrade?

Figured it out thanks for the help

So I have a CODE 52. So I tryed changing the knock sensors, that didn't work. So I took out the whole wiring harness and looked that over and it looked all good. I also went back to stock injectors and stock AFM I haven't tryed it like this yet but I have a feeling it still hasn't changed. I...

I just did a Lexus MAFS/550 upgrade over the winter and now when I get going and floor it the turbo spools up real quick to like 12 psi and then it just makes popping noises and the car just doesn't have any power. I think it might be a boost leak but the thing that confuses me is that if I just...