Search results

^All 93 in everyone one of my vechicles.

Don't these turbo's really come alive after 25psi? Of course you want to run high/safely as you can, imo I would run 15-18psi and then a race gas tune. Actually since (I assume) your getting your car runed at Titan ask them, that is their job and they will probably have the safest best choice of...

Good thing someone would probably be willing to give you free sawblades and stock swaybars are cheap,.....but it would be a time to upgrade if you wanted...

If your gonna go all out eventually I think I would put on a good hg, maybe machine the head but not the block since you can't do it at the moment, you will definatley make your 300whp on the 57 trim, but when you go all out you'll be taking the whole motor apart anyway, so I would do the...

See this is where it gets weird, you wanna do (from what I see) a kinda mild buildup but when you get talking into upgrading the head (cams, porting, valves, springs, retainers) I'm not sure what you overall goals are with the car, with some of those mods I listed there, you could be one of the...

Reccomended from MVP Motorsports & Greddy (this is what it says about 2.0 hg below): Greddy Metal Head Gasket for 1986-92 Supra - 2.0mm Part # Gr 13511183 This MHG has a bore of 85mm. This MHG is useful if you have a severely warped head and must do a lot of milling or if you...

How can the quetion of will the stock injectors pump out enough for these cams pertain to afr. Anyones setup on a 1j with stock twins and cams can tell me if they were sifficent, because they will have their afga and have their info, so infact yes they can be compared, not for a full fuel...

^ NIceeee. Also that rust doesn't look deep you could probably sand that out.

Your gonna have to do the head gasket eventually, kinda like the saying: "Measure twice, cut once", well: "1 Metal HG, no BHG''....haha... no seriously.

LMFAO!

Racing dumb cars you know you can beat is worthless, I mean come on a 4 CYLINDER COROLLA! 1) nobody cares its a corolla 2) im sure just went from street light 2 street light giving real racers a bad name when you get caught. Just because people talk shit doesn't mean you have to "show off". If...

Sounds like you got a hard on over that night. lol :)

THANK YOU TSUPER92, that is what I am looking for, so yes I will need bigger injectors.

Ok you didn't answer my QUESTION: Do I need to upgrade my fuel (injectors) for 264/272 cams? You and people tried to tell me what I'll need for full fuel upgrade, all I wanted to know was injector size. I know the supporting mods I will need and I don't want all these newbie questions which I...

You don't HAVE to machine the block unless its serverly warped. You can put on a thicker hg like a 2.0mm.

^ Metal Head Gasket? If your doing doing the head gasket anyway why not throw on a good quality one? Its a direct replacement.... no need to take the motor out.

I'd like to hear a reponse from someone with the cams, I don't want the "I think, I would" replies, not to down your inteliigence and that will be upgraded eventually but my original question has not been answered unless csnow: you have put cams on your 1jz?

T Pain tells me he's sprung.....:)

If this was your answer torward me: If you get a thicker hg you will not need to do anything to the head. You don't have to pull the motor for the head or any of your plans that I see.

I've been wondering whose car this was. Nice choice on the turbo, keep us updated.