Search results

LOL get a cherry picker and lift the whole clip that way you need one anyway. Thats what I did, not everyone haves a fork lift.

pay the little bit extra to do it right yourself and just get the whole clip

Black is a better color But keep it white because its cheaper and will end up looking better If you want a black supra bad enough sell yours and buy a black one even if needs a new paint job because black wont stick on white and if it needs any body work it will show more dings &...

Everything lines up factory with the 7MGTE parts from the tranny back mounts driveshaft, So the length of the bellhousing and block length of the maybe different the (JZ Parts) vs (7M Parts) but all the rest is the same. Like maybe the JZ block sits closer to the firewall and further back in...

Technicaly tech tom did not crack the toyota eprom they bypassed it with a rom board but not with an individual eprom. Mines, SARD, Tech Tom are ROM boards, someone have mentioned some phantom crap where there is no rom board and they hacked the toyota eprom directly. I have not confirmed...

500-550 is the max the 1jz side feeds and rail can handle its a very restrictive design and even if you fit the higher flowing injectors in the rail the spray pattern would be crap Its recomended you goto top feeds and after market rail dont worry the top feed uses RC injectors much cheaper then...

Never ever use venom on a toyota .

1UZ + Paxton will blow any comprable 7M 5H1T out of the water! cost wise and power wise.

No one have been smart enough to crack toyotas ECU or add a socket for a directly swapable programable eprom with factory maps to simply have an adjustable version. I wish. There is hints out there on how to do such as the toyota scion TC there is a programmer out there that rewrites the...

+1 Thank you Not only that you can not make more HP then this to the crank Here is your map Sourced from http://www.turbobygarrett.com/turbobygarrett/catelog/Turbochargers/GT30/GT3076R_700382_12.htm So if your engine was perfect and everything was tuned yes you would make 525 at the...

Drift motion rebuilds them but I dont know if they know enough about the other components I would call and ask.

Diode tester? what kind? To test them good you must at least lift one leg. I perfer Huntron Tracker to validate the PN or NP junction. Some simple reverse engineering techniques will give you about the right part number if they are not labled. Meaning gettting a good ecu reading...

If its a true GT35R garret housing you should have a garret part number and plate on the bearing housing look up the part number on garrets web page or google it it will tell you the specifics about your turbo based on that but it does like like a garret with an undivided T3 .6ar cool .58...

Dont boost more then 17-18psi on premium with out running better octane (you have to back off boost & timming & run rich) otherwise use race gas or meth water to get more power / octane and boost E85 is also a good alternative! Your HP is about right though with more boost / better gas gets...

You know how much a new 7MGTE short block is I would just pay 600 for a low millage 1UZ and pop it in. My brother haves a GS300 & SC400 and sold both his MKIII supras The SC400 runs super smooth he bought an aristo clip for 1800 and since he only payed ~1800 for both cars from the impound...

Well I have recieved the whole arm rest Ill take some picks later the only thing wrong is the armrest lid is made from the shallow cover (meaning cup holders wont work) The only thing I could complain about.

I would much wrather go the ?JZ-anything over any 7M maybe even 1G nea . . . your good keep up the good work a little bit more wiring but when you get there we can help you out anyway. The VVTI haves better output & economy if left stock take a chance to enjoy it and see how you like it.

I tried to go down to san-diego today & get the molds for the "B" pillars going but he didnt respond when calling him there is two guys building these alfonso & hugo. Although I did get one more piece off him I cant wait to put this in my car!

I hope to get mine done soon 2 hella DOT 90mm lamps per headlight and they are mounted high on the headlight housing so they flip up only 3" instead of 6" I have (2) 7k slim ballast hid ebayers in each headlight, Also the high beams are longer so I decided to use two low beam projectors if...

For the mkiii R154 w58 I would use a 3.7 for free way cruzer 4.3 for weekend around town delivery car. As far as power goes the more power you have the taller you want your rear gears because you dont want to shift 5 times to go down the track because you spend more time shifting then laying...