Search results

Thanks for the links. I'll definitely have to score some, if i can ever find work again.

There's not enough money in the world for me to sell mine. I'll drive it to the grave before I sell it.

Don't do anything to it! It's supposed to be a force fit. It's imperative to put it in square, and all the way in. Find a socket, or something else, round, even, and strong. It must fit on the outside edge of the seal perfectly. Do not use anything that doesn't fit right, or you will damage the...

I just used lots of teflon tape, Working well for me so far.

Make the entire body out of CF!:yelrotflm

My stepson's is not showing a mil, haven't checked for codes though.

You're still running NA right? If so first thing I'd check is the O2 sensor. My stepson's NA runs rich as fuck, because the O2 wire's busted.

Hey! Stop making fun of my stepson. That's my job! :drink1:

The cooler doesn't run from the high pressure lines. It's in the return line. Are you planning to adapt it to the high pressure lines by choice?

You're welcome.

Blasphemy!

It should be set in the garbage.

NO! It's not supposed to do that.

Be extremely careful installing the banjo bolt in the rack. It's very easy to cross-thread, as my stepson found out.

After I rebuilt my engine, (7MGTE), it had a rough idle. I replaced the coil pack and wires, problem gone. That being the case, I'm gonna say it's probably ignition related. Plugs, wires distributor cap and rotor. Or an improperly connected vacuum line could do it as well. I had an 82 Celica GT...

Told you. :: snowart ::

Before I replaced my struts and springs, The car was unsafe to drive over 100 mph, after, I've had it up to 140 so far, and it's solid as a rock. This is with original bushings all around. For my money, the Tokico Illuminas work great, and so does tems.

I missed that he was using the filter as a catch can.

Where's the can in that drawing? It has to be before the accordion hose, something like I put in your drawing.

^ Gotta disagree. The tems system works very well, with new struts. Yes, an aftermarket system would be better, but the expense is prohibitive. As for using the HP's You can get Illumina's on ebay for a good price. It's where I got mine...