I have intrax installed and the car sits low now will kyb's be able to handle this drop. if not i think am going with the koni adjustible ones, just going to have to do them 2 at a time the questiong is which 2 to replace first. front or rear
when i feel board i might take a crack at it,am pretty sure the cams are off a little, my timing is still advanced like 28 should be 13+ based on what the manual says. the head tech at my shop says it won't hert any thing to drive it this way it just as the slite miss at idle only at idle other...
ok i'll try this and see what i get, lets assume that the signal is not getting to the ecu, it would have to be getting a signal from one of the sensors in the high pressure line. am going to have to investigate this.
when i put the light on it the best i can get is 15BDTC which means my timing is advanced i belice that when the timing belt was replaced it was not installed correctly.
Well I fixed my A/C a short time ago, now when ever i turn it on my idle drops from 700rpm to 500rpm i know that the idle should go up or atlest hold the same idle that should be controled by a load switch some were, i just wanted to know if any one has this problem. and were can i find the ac...
yea i took it out set it like the pic and the car rungs great pulls hard but has this little pop at idle well the idle is strong at 700 and the car runs great i'll learn how to live with the pop. i have full 3" exhaust no cats can this cause the pop
Hello over the week end I installed a replacement cps, just removed the old one and installed the new one in the same place car ran fine but had a miss at idle not a bad miss just a light miss but constant. so I hooked up a timing light timing was advanced 34degres, so I set the motor to tdc...
Well I need new shocks for my car big time. will i notice it much if i get shocks without tems support. i mean i realy won't know how good tems is because the shocks on the car were dead from day one of me owning this car. but is it worth paying $100 per shock for tems or will kyb's be a good...
short notice. already have plans for this week end.
next week end might be good we can meet up at like old wal mart on merril and ride out to the park.
i got a new cps to install is it possible to install this new cps and set it to were the old one was and not set the timing right away. i mean as soon as it get to work and get my hands on a timing light i will set it.
yea it is hollow but it has a filter at the bottom. not sure if it nessery to have the filter but better safe than sorry my cuess wold be to keeps jumk out of the ps pump.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.