Search results

Well after searching my butt off and downloading a TSRM i took my 87 na down to the cams and valve lifters. I have had a pretty decent ticking/ knocking sound going on. You can barely hear it at idle. But gets louder with revs. I have already tried pulling each injector clip at a time with no...

This forum is a JOKE! Just like all you guys!

I am thinking about a 7mgte swap into my na supra. Can I use a 89 turbo ecu and harness in my 87 car? Or does the harness have to be the same year as the body? Thanks

Not a bad kill on the 5.9 dakota. I had a 98 grand cherokee 5.9 limited which is pretty similar to the dakota. with intake and exhaust the jeep would run 9.40's through the 1/8th. Sadly thats the fastest vehicle I have owned till I get my soup on the road. Cant wait:biglaugh:

do u mean crankshaft pulley bolt?

Is it me or does it seem like the 2jz's hold up better than the 7m's? I mean all I ever hear about is rod knock from 7ms but hardly anything about 2jz's that alone might be worth the hassle to swap it in and turbo it. Has anyone on here done a sucessful 2jz na-t conversion in a mk3? Thanks...

well i know none of them are cheap. But im saying im not very familiar with the 7m's or 2j's and I want a boosted motor that I can drop down in there and do some mods and get in the low 13's high 12's. I was thinking about buying a ebay 7mgte with harness and ecu and dropping it in. The only...

Tryin to stay fairly cheap and simple should I. My car is a 87 NA. Rebuild 7mge and go with turbo off of gte and gte wiring? Straight swap in a 7mgte with wiring and ecu? Buy 2jz-ge and go turbo? Rebuild 7mge and spray it for about 125 shot?

Well I've searched and searched and I just wanted to be certain, I have a knock.... it happens at idle and grows with rev's, but its not a consistant knock its very random, almost sounds like popcorn when its about done cooking. I thought when rods knock its a consistant knock not something so...

Well i checked the codes. I got a 12 and a 52. 12 is rpm signal? and 52 is knock sensor? any thoughts? Thanks

Keep in mind i have a jeep and untill now have never owned a dohc engine. Im taking it that a CEL is some kind of trouble code? I have no haynes manual or a TSRM so I have no real idea what your talking about. Can anyone tell me how to check the timing?

Ok so i bought this 87 supra na. The guy said his son took it out and when it came back it had a tick/knock so now that i have it home i really dont believe its rod knock. Not only does it seem to be coming from the top of the engine but it comes and goes and it keeps throwing the check engine...

Does anyone know of any reputable engine shops in the central illinois area? Cause from what I understand these motors have really tight tolerences. Gonna rebuild the 7M. Any info would be great guys. Also any thoughts that I should consider? Thanks

So bottom line, how big of a shot will a stock, good condition 7mge take with the proper supporting fuel mods? And an mhg with arp studs. I know the stock block will handle around 400wrhp.... Why can't i do that with nitrous?

I need some advice. Would it be worth tearing down my 7m-ge and having it rebuilt and use gte pistons possible forged pistons and clevite bearings and after the complete rebuild doing the na-t conversion or would it be better to just swap in a 1j or 2j. I like the na-t idea cause there is not a...

I appreciate all the ideas. Im starting to lean towards the 2jz-ge-t. can someone elaborate more on the 2jz na-t with the 7m wiring and 7m ecu. Can i use my stock na ecu nad na wiring? Any info would be great. Thanks

I needs some advice on what I should do. I have a 87 5spd Na supra and am wanting to either rebuild the 7mge and put gte pistons in it and do the na-t conversion or do a 2jz swap. any advice? Im wanting a 450hp car. Which do u think would be the easier route? Any info would be greatly...

Thanks for the info but would do you consider a "good bearings"? And by freshining up the head do you mean like new valve seals? Thanks for the info cant wait to get the beast on the road and i havent even picked it up yet....LOL.

Forgot to mention im hoping to eventually get around 400 to 450hp out of this motor will the stock bottom end handle it? Is this number acheivable with the 7mge-t? Thanks

Hello im new to the forum just purchased a 87 na supra 5spd. I go to get it tomorrow and the guy says it has a ticking or knocking noise. I figured i would just pull it and go through the motor and rebuild it cause I want to do a na-t on it. Any thoughts on what to have it bored out to what to...