Search results

I think the animation switches as well. I know I saw it turn both ways but with my interests/hobbies it would makes sense lol. -Nick-

Sao1: Thanks man! I will although I've been slacking on picture taking maybe because progress has been SO SLOW lately. Wrapped the manifold today. Made a makeshift PS cooler out of the 7M oil cooler. Mounted right behind the intercooler. One of my wires for the SAFC separated when I was...

I'm having an issue with charge pipe routing. I bought an 2.5" elbow but no matter how I move it there's very little space from the strut tower, PS line, and radiator hose. Should I ditch the elbow and do a 90 degree coupler? OR Use the elbow and a 90 degree pointed down from there? Also the...

Intercooler is now mounted and the intake side of the piping is now complete. The charge pipe routing will need.... some more attention. It seems that I have little to no room for a coupler to fit onto the compressor. I was thinking of having an elbow welded onto it which I can have done...

On your IC piping, do you ever bottom out? I'm at that point of figuring out piping as well lol. I made brackets for the intercooler and its friggin rock solid in there.

I'd like to get a lot of stuff done today. Yesterday didn't really have too much time to work on stuff. Dog was ill and needed a trip to the vet. Anyone have input on those questions? -Nick-

Another question... I'm mocking up my IC and pipes right now and I think I'm going to have an interference problem with the coolant overflow tank. The dimensions are 12x12x3. It's the universal one from DriftMotion. I can make the brackets no big deal however, with it tucked up underneath...

Oh how difficult would it be to wire in a switch for the check engine light? I really don't want it on all the time and I don't want to pull the cluster each time I want to check codes so I'd like to wire in a switch and keep it in my coil holder slot or something. Is there a wire on one of the...

Thanks Sean! Thanks webbs. Also for throttle cable, do I just use a 92-94 Camry cable? Any word on the ports on the intake manifold? Got a LONG list of stuff for tomorrow... Washer for speedo cable Make Intercooler Brackets Mock up piping Buy more 3" to 2.5" reducers Call guys at the...

So there are ports on the intake manifold that I assume are for coolant. One directly under the TB. Which ones do I need to block and which ones do I need to run? I suppose I'm getting closer... Thanks! -Nick-

So I decided to mock stuff up today. BTW I think the weight of the engine on the mounts... The solid mounts that I've got can move around right now with very little effort. I really hope those mounts will work. So here's muh pictures: Thanks for looking. BTW how difficult would it be...

Good news: Engine and trans are now in the car. Bad news: Broke an A/C line..... BAH! -Nick-

Well it involves some... Jimmy Rigging. Let's leave it at that. :) Well until i figure out if it works or not. If it works than its a solution to people doing this build who don't want to buy any extra stuff to make this fuel system work. Using a mix of 7M and 2JZ components. -Nick-

Okay I think I figured something out for the fuel setup... I'll let you know what it is if it works. ;) -Nick-

Okay so take the the feedline from the 7M and see if it matches the input for the 2JZ Rail? hrm... Thanks man -Nick-

I had a question about the fuel lines. How would I be running them if I'm using the stock 2JZ fuel pressure regulator? Would I be using any of the lines off of the 7M? Thanks! -Nick-

Alright will do! Plus I still need to wrap it. I still need to have the manifold re-welded yet again however the shop doesn't want to do it unless its in the car which is understandable. Thanks man! Off to snap for parts. -Nick-

So I SHOULD be dropping it in tomorrow. We'll see though. Stuff just always seems to come up! Mo money mo money mo money. So the PS bracket was ground down as well as the CPS. Hopefully the A/C lines will fit onto the compressor! We'll see though, its not that much work to take it off to...

So a little update. I broke a piece of my block off. That was cool. The lower stud for the A/C comp I guess was over tightened and snapped the piece of the block it threads into. It just snapped the outside of the threads. So I'm hoping my block isn't ruined. On top of that my A/C...

What kind of wiring did you do to the knock sensors. Getting me worried about my issue... I had to extend the wires and I didn't know they were sleeved so I peeled back the sleeving and connected the actual wire but now I'm getting worried... I hope swapping the sensors works man! (Crossing...