It shouln't be long before the car is on the road. I pulled the tank after posting this, and I didn't even drain it. It doesn't feel like it is even close to half full. Maybe a 1/4 tank.The good running motor is going in as soon as I get my wiring harness converted to fit the 92. That is very...
Update!
I got the gas tank pulled from the 89 today. Hopefully I will have no problems tomorrow, when I attempt to install it in the 92. It wasn't quite as 1/2 full as I thought it was, as I had no trouble pulling it without draining it.I just hope I have everything I need under the 92. He had...
I'm not very familiar with turpentine to know it's consistency. But, I had about a 1/2 tank of gas in my 89 when I stopped driving it in February. I want to try to remove the tank, and it should be a much easier job without the extra weight. I'm going to be installing the tank into my new 92...
OK, I believe I have B1, except for the big wires in the middle. I have looked at my housing in the car, and what I have is no plug at the top, Black/white in the middle, and Black Orange at the bottom. My harness does not have a Black White. It has Black/big blue stripe, Black/little blue...
The 92 is a factory 5-speed. I currently can't even find my b3, so its good to hear that its only TEMS and ABS. My biggest problems are on B2. I just got laid off this morning, so I have plenty of time on my hands now. I'm going to search the wires that were sent with these housing, and several...
I'm going to go out on a limb here and bet that the Do-luck would win in a rigidity test. The $45 dollar Ebay one is probably as rigid as a rubber band. What they mean by universal, is that this will look bitchin in your Civic
I don't know Ian..........Is that fast for a powerful MKIV? I don't see much 1/8 mile posted, but I bet some of the 7-8 second quarter MKIV's can do it with a 2jz.
Impressive to me none the less.
I don't like to post a lot about being out of town until after the fact. I left sunday afternoon, and have spent the last couple of days in Tuscaloosa for my son's Orientation. Today was only a 1/2 day, and then I went and met Jay along the side of the interstate (literally), and finally got him...
Can I get a picture of the pin out on the C1 plug for the 92? I have mine removed, and just noticed that I have no map of where to put them in the new housing.
I have also run into a couple of other problems while doing these. The big terminals in the 89 B1 housing are too big to fit into the...
By 9 A.M. I was coming back in this morning for coffee. I had already removed the clutch line all the way from the master cylinder all the way to the slave. None of that line were in the 92, but I have installed in in there now. I also got the fuel line removed, and will attach that to the motor...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.