Yhatzee89's Second-Hand Supra Build Thread
- Thread starter yhatzee89
- Start date
First off let me sincerely thank you for not only protecting our freedom, but also for your sacrifice.
Where did you get that 9k tach and 185mph speedo faces?
Where did you get that 9k tach and 185mph speedo faces?
I got the 9k tach from "SupraGirl" on here and the 185mph/9k faces from a guy who got them from "SupraClaou".
I also found my next piece I'm going to get to clean up my interior a bit. Thoughts?
http://www.uprproducts.com/mustang-billet-bullit-automatic-shift-knob.html
I also found my next piece I'm going to get to clean up my interior a bit. Thoughts?
http://www.uprproducts.com/mustang-billet-bullit-automatic-shift-knob.html
I figure it's time for an update, since my last update I've fixed some things:
Replaced the burnt up diff with a 3.91 LSD with Ford LSD fluid, painted yellow to help detect leaks
Tried to get a set of previa calipers installed but had issues bleeding them, so I ended up reverting back to the stockers, just waiting to try again until I have a place to work on it. But here they are
Installed a set of TTR front door cards
Also:
replaced the steering rack bushing (poly)
brake lines (Goodrich SS)
Installed steering rack spacers (beech)
Replaced the rear calipers with used ones that aren't seized (thanks Nelson)
Installed my black ProSport gauges in the pillar pod
Bypassed my NSS so the car actually starts
Installed a Whiteline front sway bar
I also have snagged up some parts that are awaiting appropriate install location and weather
aluminum crash bar from junk yard
New front plastic
(With new bar)
TTR floor mats
JZA70 brake ducts
Bought a fan shroud so I don't have to worry about takin a finger off anymore
And a set of grey cloth back seats
Replaced the burnt up diff with a 3.91 LSD with Ford LSD fluid, painted yellow to help detect leaks
Tried to get a set of previa calipers installed but had issues bleeding them, so I ended up reverting back to the stockers, just waiting to try again until I have a place to work on it. But here they are
Installed a set of TTR front door cards
Also:
replaced the steering rack bushing (poly)
brake lines (Goodrich SS)
Installed steering rack spacers (beech)
Replaced the rear calipers with used ones that aren't seized (thanks Nelson)
Installed my black ProSport gauges in the pillar pod
Bypassed my NSS so the car actually starts
Installed a Whiteline front sway bar
I also have snagged up some parts that are awaiting appropriate install location and weather
aluminum crash bar from junk yard
New front plastic
(With new bar)
TTR floor mats
JZA70 brake ducts
Bought a fan shroud so I don't have to worry about takin a finger off anymore
And a set of grey cloth back seats
Last edited: