WTF wheres my connector??

[noel]

Soo.. im lost here i have a 1988 Toyota Supra with a 7mgte/R154 im trying to put the pieces together after the previous owner suck major balls...

OKay NOw..i have the regular clutch fan right... Next to that i have 2 small radiator Fans..from what i learned the connectors are behind the Battery or atleast the wires/connector are in the general area but i see 2 wires coming out of the wiring harness for 1 connector

im pretty sure im missing another 2 wires to make the second connector for the fan

 

[Poodles]

pre-89 had one fan.

 

[supraguy@aol]

/\ This.

 

[noel]

HMmm so why the heck do i have 2 fans...did the previous owner now not wtf he was doing??

 

[noel]

so the supra will be fine with just one radiator fan instead of 2??

 

[yhatzee89]

Maybe he replaced the -89 single with the 89+ double fans. Has the front end ever been damaged...?

 

[noel]

Maybe he replaced the -89 single with the 89+ double fans. Has the front end ever been damaged...?

NOt that i can see im guessing he had the fans on a switch or something hence why the wires were cut ...i just wanna make sure it doesnt overheat with just one 1 fan

 

[mkiiichip]

Just get the correct shroud, made for one elec fan.

 

[jetjock]

Or just use both. The small fan(s) are actually there for the AC system.

 

[Jeff Lange]

I would wire it up to use both. There's a reason Toyota added another fan, it can use it, haha.

Jeff

 

[noel]

I would wire it up to use both. There's a reason Toyota added another fan, it can use it, haha.

Jeff

i would love to use both but that means i would have to rig the seond fan with a switch since the wiring harness doesnt support 2 fans

 

[noel]

Or just use both. The small fan(s) are actually there for the AC system.

how can i use both? if theres no Connector on the harness for the second fan i have to rig up a switch for incabin use and become a 1 fan human thermostat lol...

 

[jetjock]

The harness doesn't support two fans? Really? How did you determine that? And you know the fan relay is nearby right?

 

[Dan_Gyoba]

Tap-in connectors work. Or make a "Y" harness with spade connectors (Which work fine, BTW.)

 

[mkiiichip]

The likeliness of hackery is much greater, trying to get the dual fans to work. I still say just get the steup its already designed for.

 

[Poodles]

If you can't connect two extra wires without "hacking" everything...

 

[noel]

If you can't connect two extra wires without "hacking" everything...[/QUOTEI
so pretty much what your saying is just add the other fans 2 wires into the existing connctor ...I didn't think the curcuit could handle another fan

 

[Poodles]

so pretty much what your saying is just add the other fans 2 wires into the existing connctor ...I didn't think the curcuit could handle another fan

You'd think wrong...

 

[noel]

You'd think wrong...

o wow clearly they are on the same circuit..i didnt know that..where did u get that diagram from? i like how its colored lol i shall start the spliceing tonight your the best poodles -nohomo