also would i need to get a 2jz rear housing to put a 2jz water pump on a soarer 1jz
:1zhelp:
:1zhelp:
Last edited:
would a 2j-ge water pump pulley fit onto a gte water pump
- Thread starter jza240sx
- Start date
yea you gotta get the rear housing i thought that just the front part would fit lol didnt work out so well i got the new pump with the rear housing from a sc300 once i got that everthing bolted right up
wolf31685;1381122 said:
would the dealership sell me the rear housing seperatly?? i have the acual water pump already.
wolf31685;1381122 said:
would the dealership sell me the rear housing seperatly?? i have the acual water pump already.
sounds reasonable actually. at worse you have to spend a little extra on a complete setup
The pullys all change over.
The clutch fans will also from 1jz-, 2jz-, ge, gte
The soarer is the same I dont think you need both housings for the 1JZ soarer engine because they dont use the hydro fan.
If you have the hydrofan you need the rear housing also.
The clutch fans will also from 1jz-, 2jz-, ge, gte
The soarer is the same I dont think you need both housings for the 1JZ soarer engine because they dont use the hydro fan.
If you have the hydrofan you need the rear housing also.
Evilempire1.3JZ-GTE;1383520 said:
this is probably the most retarded question ive ever asked but to just confirm which one is the mechanical or hyrdo fan. im confused to which one it is.
