wiring woes na-t 87 gte eletronics into 90 na shell

[koreyd]

http://www.facebook.com/album.php?aid=267249&id=540960592&saved#/photo.php?pid=10898390&id=540960592

this is the b1 plug off of the 87 turbo harness i have no idea where these plugs are supposed to go.
http://www.facebook.com/album.php?aid=267249&id=540960592&saved#/photo.php?pid=10898393&id=540960592

this is b1 plug off the 90 na harness which i am using. it has been pinned form the 87 harness.

http://www.facebook.com/album.php?a...p?pid=10898394&id=540960592&fbid=473694315592

i think this b3 plug off the 90 na engine harness hasn't been repinned yet

also is the m1 connector on the 87 turbo harness the sameas the m1 connector from the 90 na body harness. they are pinned with the same colored wire and are the same clip. are these plugs actually different

http://www.supras.nl/index.php?option=com_content&task=view&id=34&Itemid=50
i am using this website to do my rewire. i am trying to ingore all the info on swapping the jz plugs.

 

[bmoss85]

Can't view your pics.

 

[koreyd]

87 b1 i can't find info on where these wires go to

90 b1 aka ih1 maybe. pinned from the 87 egnige harness

b3 not repinned yet

i have been usinghttp://www.supras.nl/index.php?option=com_content&task=view&id=34&Itemid=50as my refernece site

 

[hvyman]

what motor is this for? so you have like 8 or 9 wires that dont have a place to go?

i might be doing this soon for someone and was planning on using that site.

 

[koreyd]

the ones i am having trouble with are the four wires in the b1 yellow connector from the yellow 87 turbo harness

the white - green and the white-red on the b3 connector from the 90 na harness

last but not least the blue - white wire from the three pin connector and thats it

anybody have a clue. please help

 

[92TealSupra]

Little 3 plug you wanted to know those two wires.
1. #160 A/C water temp s/w no. 2 Blue – white

2. A/C water temp switch Green - Red


Last pic is for ABS

 

[koreyd]

oh the car was a 90 na
the na-t using 87 gte turbo,

now going to setup the 87 turbo electronics using all of them and the 87 ecu
just trying to get the body connectors on the 87 turbo engine harness to match up to the na body harness.
i am about 98 % done. hopefully it will be ready to put in the car and test shortly

 

[92TealSupra]

Here to to my site this is for a '88 M/T wiring harness bud.

http://92tealsupra.webs.com/88turbomtwiring.htm


Also your 3rd and 5th picture are the same thing both are fro the ABS, the Gray plug is off your '90 and the white plug is off the '87 harness. Ill check back on here later I have to head out. Hope the site helps you.

 

[koreyd]

92 tealsupra
ok i understand what they are for now but what i don't understand is where they are supposed to be wired in the 90 na dark grey clips
i can't find these answer on the supra.nl site
all i have left are these wires and the coilpack rewire which i had help on from another post on supramania.
92tealsupra - any clue about the last four wires on the b1 yellow connector. where they go

 

[koreyd]

so as long as all the dark grey clips are full i am good to go then

and you the man.

 

[92TealSupra]

92 tealsupra
ok i understand what they are for now but what i don't understand is where they are supposed to be wired in the 90 na dark grey clips
i can't find these answer on the supra.nl site
all i have left are these wires and the coilpack rewire which i had help on from another post on supramania.
92tealsupra - any clue about the last four wires on the b1 yellow connector. where they go

Go to my site.

 

[koreyd]

my last question pretty much then is what to do with the blue wire from the b4 connector i have the green one already wired

 

[koreyd]

printing 88 mt pinout and checking the wires now

 

[koreyd]

on;y three wires left b1 yellow brown and white - blue
i see that the brown wire runs to the hac sensor which i will use. i believe that once i wire the vpc the hac sensor will be resistors in the feilds harness
the white and blue wire is for injector 1 and 4. my guess is a check connector or something that to the combination meter

and the a/c switch two wire off the two wire connector i can't find where is goes and that is the end of my questions about the body connector repin

 

[hvyman]

when you figure these out would you mind posting it as im doing the complete opisite with 89-90 harness into a 87.

 

[koreyd]

i got most of my info from thehttp://www.supras.nl/index.php?option=com_content&task=view&id=34&Itemid=50

and also from 92tealsupra http://92tealsupra.webs.com/88turbomtwiring.htm
good luck

 

[koreyd]

i only have three wires left the brown out thte b1 and a white with a blue stripe and blue with a white strip out of the two pin connector

 

[hvyman]

yeah thats what im going off. what did you do with the white- blue and red-green off the b1?

 

[hvyman]

so these are the wires im missing where they go

blue-black on b1 on the 89 harness (theres 2 on the 89 and 1 on the 87)
white-blue, brown, red-green on b1 on the 87 harness.
red-black, brown, blue-red on the hac connector for the 87 harness.


blue-white for the b4 on the 87 harness


any ideas?

thanks.

 

[hvyman]

anyone?