wiring on intake side of engine

[gotsomegetsome]

just put back in my head and started reinstalling everything else
and i ran into a few dilemmas

there are two extra connectors that look exactly like injector connectors
but i dont know where they go
and a green connector also stemming from the main harness
but its not long enough to stretch to the other side of the engine so it cant be part of the water temp housing where most of the green connects are


anywho...if anyone has insight as to where these go that would be awesome
and even a complete wiring diagram would be awesome
but thats just as long as its not too much a hassle


btw... the chilton manual sucks
but you all knew that
i just wanted to reaffirm that

 

[j3pz]

just put back in my head and started reinstalling everything else
and i ran into a few dilemmas

there are two extra connectors that look exactly like injector connectors
but i dont know where they go
and a green connector also stemming from the main harness
but its not long enough to stretch to the other side of the engine so it cant be part of the water temp housing where most of the green connects are


anywho...if anyone has insight as to where these go that would be awesome
and even a complete wiring diagram would be awesome
but thats just as long as its not too much a hassle


btw... the chilton manual sucks
but you all knew that
i just wanted to reaffirm that

pictures would do wonders here. the two that look like injector connectors probably goto the vsv's under the intake. as for the green connector, is it round? sounds like a knock sensor but with out more info/pics cant say more

 

[Kckazdude]

http://www.cygnusx1.net/Supra/Library/TEWD/MK3/

Toyota Electrical Wiring Diagram for 90 Supra.

 

[gtsfirefighter]

Pics. We need pics!

 

[sogi99]

need pics i just did my headgasket 3 months ago and I can tell you which is which pretty much unless you already fixed it. good luck.

 

[Supraboy89]

the green is ecu temp sensor on the side thermostat housing. sensor should match the color. the other is cold start sensor on top of thermostat housing.

 

[j3pz]

there are two extra connectors that look exactly like injector connectors

a green connector also stemming from the main harness
but its not long enough to stretch to the other side of the engine so it cant be part of the water temp housing where most of the green connects are

none look like injector connectors, and it wont reach the thermo housing. did you even read the whole post? drink much?

 

[gotsomegetsome]

nevermind about hookups
i found out what they were

the two "injector looking connectors" were for the vsv's that hook up to the vacuum tubing

and the green one hooks up to the coil pack

thanks though
i'll have pics up shortly
just check out the thread i have in build up gallery