Whining sound under boost.

Gunnar

New Member
Jul 11, 2008
116
0
0
Belgium
www.chiptuners.org
Rebuilt engine, new 57 trim turbo, 2000km old original hks SSQV.
When i start boosting i hear a whining noise coming from the engine, it sounds somewhere between a supercharger whine and a starwars spaceship :)

It didnt do it after the rebuild, just a few weeks later.

I checked for the obvious things like boostleaks with a boostleak tester, checked manifold for leaks. Could it be the SSQV? When testing for boostleak it didnt blow.


Edit: and yes i chekcked shaftplay on the turbo, it is still like new, no touching anything on the sides etc.
 

KicknAsphlt

Occasional Peruser
I had that whine, ended up being the turbo to manifold gasket....it had delaminated and a couple of the mounting nuts on the turbo had worked loose...so air was blowing by that gasket and vibrating the layers.

Gunnar;1390387 said:
Rebuilt engine, new 57 trim turbo, 2000km old original hks SSQV.
When i start boosting i hear a whining noise coming from the engine, it sounds somewhere between a supercharger whine and a starwars spaceship :)

It didnt do it after the rebuild, just a few weeks later.

I checked for the obvious things like boostleaks with a boostleak tester, checked manifold for leaks. Could it be the SSQV? When testing for boostleak it didnt blow.


Edit: and yes i chekcked shaftplay on the turbo, it is still like new, no touching anything on the sides etc.
 

Gunnar

New Member
Jul 11, 2008
116
0
0
Belgium
www.chiptuners.org
I did pressurize the system way over the normal boostlevels nothing popped off or blew air.
That turbo gasket seems like the next thing to look for.

thanks for that suggestion.
 
Nov 29, 2006
89
0
0
Vacaville, CA
Gunnar;1390614 said:
I did pressurize the system way over the normal boostlevels nothing popped off or blew air.
That turbo gasket seems like the next thing to look for.

thanks for that suggestion.
Get a Spray Bottle and some soapy water. Spray the piss out of the couplings. If bubbles start forming you have a leak. 20psi is good for the test.