I got a used flywheel awhile back but Im not sure if its the right one. Im needing info on how to tell the difference. Ive got the R154 trans and not the W58 by the way.
Which flywheel??
- Thread starter lowtaco
- Start date
the flywheel should be the right one because all the 7m motors are the same flywheel bolt pattern. I have only dealt with my r154 so if im wrong someone plz correct me. you can throw up a picture.
Well I work here at a dealership and there are two diff part #'s one for the GE and one for the GTE I just cant tell which one I have cause all the illustrations dont show detail...
The ge and gte flywheels are indeed different! I don't exactly know the visual diff but I know the bolt pattern for the pressure plate are different.
The GE does not take the same clutch as the GTE.
Bolt patterns on the pressure plates are different.
The dowel pins on the GE flywheel are just an inch (about) from the bolt hole.
The dowel pins on the GTE flywheel are centered right in between the bolt holes.
Bolt patterns on the pressure plates are different.
The dowel pins on the GE flywheel are just an inch (about) from the bolt hole.
The dowel pins on the GTE flywheel are centered right in between the bolt holes.