Where can get a muffler like this but...

[rumptis]

Where can I get a muffler like this but with a 3" inlet. Seems like everything has 2.25 in inlet. The picture of the muffler is a Magnaflow.

I'm also looking for the outlet tips to be between 2.5"-3.5"s

 

[MassSupra89]

You can't.

I looked for that exact muffler for awhile. But Magnaflow only makes the "street" series mufflers with 2.25 inlet max.

I ended up having to go with a single tip "Race" series which they make in 3" straight through.

http://www.magnaflow.com/02product/mufflers/02mirrorfinish.asp

 

[mjernigan]

I'm about to buy:
http://www.magnaflow.com/02product/shopexd.asp?zone=main&id=464
PART #: 12198
DESCRIPTION: Single/Dual
3"/2.5" Dual
14" Body Length, 20" Overall Length.


However, you could also buy the Polished version:
http://www.magnaflow.com/02product/shopexd.asp?zone=main&id=630
PART #: 14221
DESCRIPTION: Single/Dual
3"/2.5" Dual
14" Body Length, 20" Overall Length.

Cheapest I have seen was here(I don’t vouch for the vendor; buying my locally):
12198 - Price: $66.95 & this item ships for FREE
http://www.amazon.com/Magnaflow-Exhaust-12198-Muffler-Center/dp/B000CCFIYO/ref=sr_1_1/002-3837656-9359228?ie=UTF8&s=automotive&qid=1174087428&sr=1-1

14221 - Price: $91.57 & this item ships for FREE
http://www.amazon.com/Magnaflow-Exhaust-14221-Muffler-Center/dp/B000CCG050/ref=sr_1_1/002-3837656-9359228?ie=UTF8&s=automotive&qid=1174087377&sr=8-1




Then just add you own polished tips.

:icon_bigg

 

[JMDigital]

Thank you.. I really wanted a dual outlet one! I dont like the single, Also I got pulled over and yelled at about my mufler, the dual at least looks a little like the stock.

 

[rumptis]

I found this on Ebay but I think that have 2 5" tips would be a bit much.

http://cgi.ebay.com/Powerpro-DTM-STYLE-TWIN-PIPE-muffler-3-inlet_W0QQitemZ230103944116QQcategoryZ50140QQrdZ1QQcmdZViewItem

 

[staticpat]

part 12198, 3" in dual 2.5" outs with 2 rolled magnaflow tips (dont remeber part #)

 

[Aspec]

Where can I get a muffler like this but with a 3" inlet. Seems like everything has 2.25 in inlet. The picture of the muffler is a Magnaflow.

I'm also looking for the outlet tips to be between 2.5"-3.5"s

Here ya go. Get the part #s and hit ebay. First one is 3" in dual 3" out. Second is 3" in dual 2.5" out. The tips are unfinished so you will have to come up with those on your own.

http://www.magnaflow.com/02product/shopexd.asp?zone=main&id=634

http://www.magnaflow.com/02product/shopexd.asp?zone=main&id=633

They also come in satin. Here is the one I have. It looks sweet and I will be doing the install this week. Prob going to paint it black and put some rolled edge stock "looking" tips on.
http://www.magnaflow.com/02product/shopexd.asp?zone=main&id=467

 

[Yakuzastinger]

http://vibrantperformance.com/catal..._1050&osCsid=550f25f9625bb1b4d57f2c13f3572094

 

[mjernigan]

Here ya go. Get the part #s and hit ebay. First one is 3" in dual 3" out. Second is 3" in dual 2.5" out. The tips are unfinished so you will have to come up with those on your own.

http://www.magnaflow.com/02product/shopexd.asp?zone=main&id=634

http://www.magnaflow.com/02product/shopexd.asp?zone=main&id=633

They also come in satin. Here is the one I have. It looks sweet and I will be doing the install this week. Prob going to paint it black and put some rolled edge stock "looking" tips on.
http://www.magnaflow.com/02product/shopexd.asp?zone=main&id=467

Aspec,

I saw those also... however, I'm not too sure about the Length of those. 18" might make that final exhaust bend a little tight with 3" pipe.

But.. really not too sure.

 

[MassSupra89]

Mine's about 18" IIRC and it fits just right (with some hits with a dead blow) onto my Cooleeze pipes.

 

[Enraged]

these tips would look good:

http://www.amazon.com/Magnaflow-351...8?ie=UTF8&s=automotive&qid=1174091532&sr=1-14

 

[bowsercake]

that muffler looks good!

 

[peteyturbo]

I have a magnaflow 3 inch in dual 3 inch out for my rx7..Awesome muffler but you have to weld up your own tips, which I prefer anyway..

 

[tekdeus]

I think this thread has the exact solution: This guy modifes that magnaflow to be a 3" input: http://forums.celicasupra.com/showthread.php?t=18764

 

[rumptis]

Awesome thanks Tekdeus, just what I was looking for.